49621 Whirlpool Levelling Feet
This Dryer Leveling Foot is a white plastic leg that helps your appliance sit perfectly flat. If your dryer is unsteady during use, replacing this party may alleviate the issue. Install the new leveling foot and then test if you have it adjusted properly by putting the appliance on four feet back on the floor. Adjust in or out as required if dryer is unsteady. We recommend checking the other three leveling feet on your appliance in case they are also damaged or worn and need replacing. Note that you may need assistance tilting the dryer back to install the new leveling foot. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Leveling Foot
• Tools Needed: Crescent Wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Leveling Foot
• Tools Needed: Crescent Wrench
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dryer Leveling Foot is a white plastic leg that helps your appliance sit perfectly flat. If your dryer is unsteady during use, replacing this party may alleviate the issue. Install the new leveling foot and then test if you have it adjusted properly by putting the appliance on four feet back on the floor. Adjust in or out as required if dryer is unsteady. We recommend checking the other three leveling feet on your appliance in case they are also damaged or worn and need replacing. Note that you may need assistance tilting the dryer back to install the new leveling foot. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Leveling Foot
• Tools Needed: Crescent Wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Leveling Foot
• Tools Needed: Crescent Wrench
Write Your Own Review
The following parts are replaced by this product
- 3392100
- 4319350
- 688222
- 279810
- 40021
- 3392100D
- W10823505
- DE9621
Replacing the 49621 Whirlpool Leveling Feet
Step 1: Unplug your appliance from the wall outlet.
Step 2: Raise the appliance off the ground. You can use a jack or dolly to easily lift it up.
Step 3: Remove the existing leveling feet. Use a Phillips head screwdriver to unscrew them from their base.
Step 4: Insert the 49621 Whirlpool Leveling Feet into the sockets. Align the threaded shaft through the holes in the base, and secure with the included screws.
Step 5: Lower the appliance back on the ground. Tighten the screws to make sure they are securely held in place.
Step 6: Plug the appliance back into the wall outlet.
Your 49621 Whirlpool Leveling Feet are now replaced and your appliance is safely installed!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1: Unplug your appliance from the wall outlet.
Step 2: Raise the appliance off the ground. You can use a jack or dolly to easily lift it up.
Step 3: Remove the existing leveling feet. Use a Phillips head screwdriver to unscrew them from their base.
Step 4: Insert the 49621 Whirlpool Leveling Feet into the sockets. Align the threaded shaft through the holes in the base, and secure with the included screws.
Step 5: Lower the appliance back on the ground. Tighten the screws to make sure they are securely held in place.
Step 6: Plug the appliance back into the wall outlet.
Your 49621 Whirlpool Leveling Feet are now replaced and your appliance is safely installed!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
