WPW10329686 Whirlpool Black Door Cam
The Whirlpool SxS Refrigerator Lower Door Cam is a black plastic part that allows the refrigerator or freezer’s door to open and close properly. If one or both of the appliance’s lower cams are broken or the ridges have worn off, you can easily replace them with this part. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Required Accessory: You’ll need (1) new screw (item WP489483) to complete this repair. Helpful Tips: Consider applying silicone lubricant (item WP99003172) to the cam before installation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Door Cam
• Tools Needed: Multi screwdriver, Support to hold up the door
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Door Cam
• Tools Needed: Multi screwdriver, Support to hold up the door
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Whirlpool SxS Refrigerator Lower Door Cam is a black plastic part that allows the refrigerator or freezer’s door to open and close properly. If one or both of the appliance’s lower cams are broken or the ridges have worn off, you can easily replace them with this part. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Required Accessory: You’ll need (1) new screw (item WP489483) to complete this repair. Helpful Tips: Consider applying silicone lubricant (item WP99003172) to the cam before installation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Door Cam
• Tools Needed: Multi screwdriver, Support to hold up the door
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Door Cam
• Tools Needed: Multi screwdriver, Support to hold up the door
Write Your Own Review
The following parts are replaced by this product
- 2155311
- 1115901
- 2155309
- 2155310
- 2159138
- 986759
- 2155310
- W10329686
How to Replace the WPW10329686 Whirlpool Door Cam, Black
Replacing a door cam on your Whirlpool refrigerator can help ensure that the doors seal when closed. Here’s a step-by-step guide on how to replace the WPW10329686 Whirlpool door cam, black.
1. Shut off the power to the refrigerator. Make sure that the power is completely off before you proceed with the replacement. You can do this by unplugging the refrigerator from the wall or turning off the circuit breaker associated with it.
2. Remove the bottom grille plate. Use a Phillips screwdriver to remove the three screws securing the bottom grille plate on the refrigerator’s exterior.
3. Unscrew the hinge pin. Using the same screwdriver, unscrew the hinge pin to remove the top hinge plate and the cam plate.
4. Install the new door cam. Place the new door cam at the end of the bottom hinge plate and secure it with the hinge pin.
5. Reinstall the bottom grille plate. Align the grille plate at the bottom of the refrigerator. Secure it with the three screws using the Phillips screwdriver.
6. Turn the power back on. Restart the power to the refrigerator to test the new door cam. To do this plug the refrigerator back in or turn the circuit breaker back on.
7. Check the door alignment. Make sure that the door seals properly when closed. If it aligns correctly, then you are done with the replacement.
By taking these steps and replacing the WPW10329686 Whirlpool Door Cam, Black, you can ensure that your refrigerator’s doors seal properly and keep your food fresh.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a door cam on your Whirlpool refrigerator can help ensure that the doors seal when closed. Here’s a step-by-step guide on how to replace the WPW10329686 Whirlpool door cam, black.
1. Shut off the power to the refrigerator. Make sure that the power is completely off before you proceed with the replacement. You can do this by unplugging the refrigerator from the wall or turning off the circuit breaker associated with it.
2. Remove the bottom grille plate. Use a Phillips screwdriver to remove the three screws securing the bottom grille plate on the refrigerator’s exterior.
3. Unscrew the hinge pin. Using the same screwdriver, unscrew the hinge pin to remove the top hinge plate and the cam plate.
4. Install the new door cam. Place the new door cam at the end of the bottom hinge plate and secure it with the hinge pin.
5. Reinstall the bottom grille plate. Align the grille plate at the bottom of the refrigerator. Secure it with the three screws using the Phillips screwdriver.
6. Turn the power back on. Restart the power to the refrigerator to test the new door cam. To do this plug the refrigerator back in or turn the circuit breaker back on.
7. Check the door alignment. Make sure that the door seals properly when closed. If it aligns correctly, then you are done with the replacement.
By taking these steps and replacing the WPW10329686 Whirlpool Door Cam, Black, you can ensure that your refrigerator’s doors seal properly and keep your food fresh.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
