Online Sale!
100% Guaranteed Genuine Parts
WP9703438 Whirlpool Snap Retaining Ring
This Dryer Retaining Clip holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. You may need to replace this part if the dryer is noisy during tumbling, will not tumble, or takes too long to dry. To access the part, you'll need to remove the dryer door and the front panel, and the outer panel of the dryer. Each clip is sold separately. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Snap Ring Pliers (item 3527612). Comes with 5 pairs of color-coded tips. Tab allows quick and easy switching between internal and external rings. Features a durable return spring.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Retaining Clip
• Tools Needed: Multi screwdriver, snap ring pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Retaining Clip
• Tools Needed: Multi screwdriver, snap ring pliers
Weight : 0.007200 lbs
Dimension : 1.889700 x 0.905500 x 0.590500
Compatible Brands
About this product
This Dryer Retaining Clip holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. You may need to replace this part if the dryer is noisy during tumbling, will not tumble, or takes too long to dry. To access the part, you'll need to remove the dryer door and the front panel, and the outer panel of the dryer. Each clip is sold separately. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Snap Ring Pliers (item 3527612). Comes with 5 pairs of color-coded tips. Tab allows quick and easy switching between internal and external rings. Features a durable return spring.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Retaining Clip
• Tools Needed: Multi screwdriver, snap ring pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Retaining Clip
• Tools Needed: Multi screwdriver, snap ring pliers
Weight : 0.007200 lbs
Dimension : 1.889700 x 0.905500 x 0.590500
The following parts are replaced by this product
- 410233
- 65100-1
- 9703438
No more associated models for this part.
How to Replace the WP9703438 Whirlpool Dryer Retaining Ring
Replacing a Whirlpool dryer retaining ring can help keep your dryer in good condition. This guide will show you how to replace the WP9703438 Whirlpool dryer retaining ring.
Materials Needed:
-New WP9703438 Whirlpool Dryer Retaining Ring
-Screwdriver
-Ratchet
-Socket Set
-Pliers
-Lubricant
Step 1: Unplug the dryer from the wall socket to make sure there is no power running to the appliance.
Step 2: Remove the screws on the back of the dryer that hold the top panel in place. Lift the top panel off of the dryer.
Step 3: Locate the drum belt and remove it by carefully pulling it away from the drive motor pulley.
Step 4: Unbolt the drive motor from the unit and gently lift it away.
Step 5: Remove the retaining ring from the front of the dryer. This ring is used to keep the drive motor in place. If necessary, use pliers or a screwdriver to pry off the old ring.
Step 6: Install the new WP9703438 Whirlpool Dryer Retaining Ring into place. Use a socket set if needed to get the new ring securely tightened.
Step 7: Reinstall the drive motor and drum belt. Make sure to use lubricant on the belt before installing it, as this will help prevent excess wear and tear.
Step 8: Replace the top panel of the dryer and tighten the screws again.
Step 9: Plug the dryer back into the wall socket and turn it on to test that it works.
You have now successfully replaced the WP9703438 Whirlpool Dryer Retaining Ring. By following this guide, you can ensure that your dryer is in top condition so it can work efficiently for many years to come.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a Whirlpool dryer retaining ring can help keep your dryer in good condition. This guide will show you how to replace the WP9703438 Whirlpool dryer retaining ring.
Materials Needed:
-New WP9703438 Whirlpool Dryer Retaining Ring
-Screwdriver
-Ratchet
-Socket Set
-Pliers
-Lubricant
Step 1: Unplug the dryer from the wall socket to make sure there is no power running to the appliance.
Step 2: Remove the screws on the back of the dryer that hold the top panel in place. Lift the top panel off of the dryer.
Step 3: Locate the drum belt and remove it by carefully pulling it away from the drive motor pulley.
Step 4: Unbolt the drive motor from the unit and gently lift it away.
Step 5: Remove the retaining ring from the front of the dryer. This ring is used to keep the drive motor in place. If necessary, use pliers or a screwdriver to pry off the old ring.
Step 6: Install the new WP9703438 Whirlpool Dryer Retaining Ring into place. Use a socket set if needed to get the new ring securely tightened.
Step 7: Reinstall the drive motor and drum belt. Make sure to use lubricant on the belt before installing it, as this will help prevent excess wear and tear.
Step 8: Replace the top panel of the dryer and tighten the screws again.
Step 9: Plug the dryer back into the wall socket and turn it on to test that it works.
You have now successfully replaced the WP9703438 Whirlpool Dryer Retaining Ring. By following this guide, you can ensure that your dryer is in top condition so it can work efficiently for many years to come.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review