Online Sale!
100% Guaranteed Genuine Parts
WP2180353 Whirlpool Dispenser Door
The SxS Refrigerator Ice Dispenser Chute Door opens to allow ice to pass through the dispenser and closes to prevent ice from dropping out of the refrigerator onto the floor. If your appliance’s current chute door has damaged foam or broken locking tabs, you can easily replace the defective part with this item. Note that this part no longer uses a ribbon heater due to an improved foam design. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Dispenser Chute Door
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Dispenser Chute Door
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.105300 lbs
Dimension : 3.543300 x 3.385800 x 1.220400
Compatible Brands
About this product
The SxS Refrigerator Ice Dispenser Chute Door opens to allow ice to pass through the dispenser and closes to prevent ice from dropping out of the refrigerator onto the floor. If your appliance’s current chute door has damaged foam or broken locking tabs, you can easily replace the defective part with this item. Note that this part no longer uses a ribbon heater due to an improved foam design. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Dispenser Chute Door
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Dispenser Chute Door
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.105300 lbs
Dimension : 3.543300 x 3.385800 x 1.220400
The following parts are replaced by this product
- 2157651
- 2180352
- 2180353
- 2261464
No more associated models for this part.
DIY Steps to Replace the Whirlpool WP2180353 DOOR-CHUTE
1. Unplug your refrigerator from the wall outlet before beginning work.
2. Open the refrigerator door and locate the screws that hold the Door-Chute in place.
3. Using a Phillips head screwdriver, remove the screws to detach the Door-Chute from the door.
4. Pull the Door-Chute away from the door.
5. Take the new Door-Chute and slide it into the openings at the top and bottom of the door.
6. Secure the Door-Chute in place by reattaching the screws.
7. Plug your refrigerator back into the wall outlet and you’re done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your refrigerator from the wall outlet before beginning work.
2. Open the refrigerator door and locate the screws that hold the Door-Chute in place.
3. Using a Phillips head screwdriver, remove the screws to detach the Door-Chute from the door.
4. Pull the Door-Chute away from the door.
5. Take the new Door-Chute and slide it into the openings at the top and bottom of the door.
6. Secure the Door-Chute in place by reattaching the screws.
7. Plug your refrigerator back into the wall outlet and you’re done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review