Online Sale!
100% Guaranteed Genuine Parts
WPW10359269 Whirlpool Dryer Shaft Support Roller
The Dryer Drum Support Roller Shaft holds the drum roller in place on the bulkhead and provides a smooth surface for the roller to spin on. This part is intended for your right side drum support. This replacement shaft is 3-3/16" long, but does not require a washer or a nut. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before you begin. Helpful Tip: While the dryer is disassembled, drum roller (item 349241T). This kit contains two drum support rollers. If the drum rollers are worn out, the dryer may not turn properly or may be excessively noisy. Be aware that the drum bearings are self-lubricating; it is not necessary to lubricate them yourself.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Support Roller Shaft
• Tools Needed: Phillips-Head screwdriver, snap-ring pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Support Roller Shaft
• Tools Needed: Phillips-Head screwdriver, snap-ring pliers
Weight : 0.034500 lbs
Dimension : 4.251900 x 1.062900 x 1.062900
Compatible Brands
About this product
The Dryer Drum Support Roller Shaft holds the drum roller in place on the bulkhead and provides a smooth surface for the roller to spin on. This part is intended for your right side drum support. This replacement shaft is 3-3/16" long, but does not require a washer or a nut. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before you begin. Helpful Tip: While the dryer is disassembled, drum roller (item 349241T). This kit contains two drum support rollers. If the drum rollers are worn out, the dryer may not turn properly or may be excessively noisy. Be aware that the drum bearings are self-lubricating; it is not necessary to lubricate them yourself.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Support Roller Shaft
• Tools Needed: Phillips-Head screwdriver, snap-ring pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Support Roller Shaft
• Tools Needed: Phillips-Head screwdriver, snap-ring pliers
Weight : 0.034500 lbs
Dimension : 4.251900 x 1.062900 x 1.062900
The following parts are replaced by this product
- 339489
- 3399507
- 4319304
- W10359269
1. Gather the tools and supplies needed to replace the Whirlpool WPW10359269 SHAFT. These include: a screwdriver, replacement Whirlpool WPW10359269 SHAFT, pliers, and an adjustable wrench.
2. Turn off the power to the dishwasher at the circuit breaker and unplug the appliance before getting started.
3. Remove the lower access panel of the dishwasher to gain access to the Whirlpool WPW10359269 SHAFT.
4. Use a screwdriver to loosen the screws of the shaft assembly and remove the existing Whirlpool WPW10359269 SHAFT from the dishwasher.
5. Take the new Whirlpool WPW10359269 SHAFT assembly and fit it into the dishwasher. Secure the new shaft assembly tightly with the screws from the original Whirlpool WPW10359269 SHAFT.
6. Using pliers, pull out the old bearing and seal from the dishwasher.
7. Place the new bearing and seal into the dishwasher, using an adjustable wrench to secure them securely.
8. Replace the lower access panel of the dishwasher and turn the power back on.
9. Test the new Whirlpool WPW10359269 SHAFT to ensure that it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Turn off the power to the dishwasher at the circuit breaker and unplug the appliance before getting started.
3. Remove the lower access panel of the dishwasher to gain access to the Whirlpool WPW10359269 SHAFT.
4. Use a screwdriver to loosen the screws of the shaft assembly and remove the existing Whirlpool WPW10359269 SHAFT from the dishwasher.
5. Take the new Whirlpool WPW10359269 SHAFT assembly and fit it into the dishwasher. Secure the new shaft assembly tightly with the screws from the original Whirlpool WPW10359269 SHAFT.
6. Using pliers, pull out the old bearing and seal from the dishwasher.
7. Place the new bearing and seal into the dishwasher, using an adjustable wrench to secure them securely.
8. Replace the lower access panel of the dishwasher and turn the power back on.
9. Test the new Whirlpool WPW10359269 SHAFT to ensure that it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review