Online Sale!
100% Guaranteed Genuine Parts
WP356427 Whirlpool Shaft Seal
WP356427 Whirlpool Shaft Seal
Weight : 0.022600 lbs
Dimension : 1.338500 x 1.299200 x 1.811000
Compatible Brands
About this product
WP356427 Whirlpool Shaft Seal
Weight : 0.022600 lbs
Dimension : 1.338500 x 1.299200 x 1.811000
The following parts are replaced by this product
- 356427
- WH8X376
- 62683
- 62684
No more associated models for this part.
How to Replace the Whirlpool WP356427 Seal-Shaft
The Whirlpool WP356427 Seal-Shaft is a crucial component of your washing machine. Replacing this seal-shaft can help keep it functioning properly and protect your clothes from water damage. Follow these steps for an easy DIY replacement:
1. Unplug your washing machine from any power source, and shut off the water supply.
2. Using a flathead screwdriver, remove the screws that hold the top and back panel in place. You will need access to the seal-shaft to replace it.
3. Carefully pull out the old seal-shaft. You may need to use pliers or needle-nose pliers to loosen it.
4. Position the new seal-shaft in place ensuring that the holes line up with the mounting holes.
5. Secure the seal-shaft in place using the same screws that were removed when taking out the old one.
6. Reattach the top and back panels, and plug the appliance back into the power source.
7. Turn on the water supply and check for any leaks. If everything is secure, you’re finished!
Replacing the Whirlpool WP356427 Seal-Shaft is an important task that must be done in order to maintain the integrity of your washing machine. With the simple steps outlined above, you can easily do it yourself!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
The Whirlpool WP356427 Seal-Shaft is a crucial component of your washing machine. Replacing this seal-shaft can help keep it functioning properly and protect your clothes from water damage. Follow these steps for an easy DIY replacement:
1. Unplug your washing machine from any power source, and shut off the water supply.
2. Using a flathead screwdriver, remove the screws that hold the top and back panel in place. You will need access to the seal-shaft to replace it.
3. Carefully pull out the old seal-shaft. You may need to use pliers or needle-nose pliers to loosen it.
4. Position the new seal-shaft in place ensuring that the holes line up with the mounting holes.
5. Secure the seal-shaft in place using the same screws that were removed when taking out the old one.
6. Reattach the top and back panels, and plug the appliance back into the power source.
7. Turn on the water supply and check for any leaks. If everything is secure, you’re finished!
Replacing the Whirlpool WP356427 Seal-Shaft is an important task that must be done in order to maintain the integrity of your washing machine. With the simple steps outlined above, you can easily do it yourself!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review