4389144 Whirlpool Refrigerator Evaporator Fan Motor
This SxS Refrigerator Evaporator Fan Motor circulates the cold air from the freezer into the fresh foods compartment of your refrigerator. If your appliance is no longer cooling as expected or you're hearing a lot of noise coming from the freezer area, replacing this part may alleviate these issues. To access the part, you'll have to remove the shelving from the freezer and the inside back panel. This part also includes an adapter wire, which you may need to use during the installation depending on the design of your appliance. The fan blade is not included (but can be purchased separately under item WP2169142). Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Motor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Motor
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This SxS Refrigerator Evaporator Fan Motor circulates the cold air from the freezer into the fresh foods compartment of your refrigerator. If your appliance is no longer cooling as expected or you're hearing a lot of noise coming from the freezer area, replacing this part may alleviate these issues. To access the part, you'll have to remove the shelving from the freezer and the inside back panel. This part also includes an adapter wire, which you may need to use during the installation depending on the design of your appliance. The fan blade is not included (but can be purchased separately under item WP2169142). Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Motor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Evaporator Motor
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- 2149299
- 2162404
- W10131845
DIY Refrigerator Maintenance: How to Replace the 4389144 Whirlpool Refrigerator EVAPORATOR FAN MOTOR
If your refrigerator is working too hard, or making strange noises, it might be time to check the evaporator fan motor. A faulty fan motor can cause your refrigerator to work harder and create more noise. To make sure your refrigerator isn't running inefficiently, follow these steps to replace a 4389144 Whirlpool Refrigerator EVAPORATOR FAN MOTOR.
Tools You’ll Need:
• Phillips screwdriver
• Flathead screwdriver
• 8mm socket wrench
• Replacement 4389144 Whirlpool Refrigerator EVAPORATOR FAN MOTOR
Step One: Unplug the Refrigerator
Before you begin any repairs, disconnect the appliance from its power supply. This step helps ensure your safety throughout the repair process.
Step Two: Access the Fan Motor
Remove any food stored in the freezer. Carefully push the basket out of the way, then remove the shelves. Remove the back panel in the freezer compartment by unscrewing the screws that secure it.
Step Three: Remove the Fan Motor
The fan motor is located at the bottom of the freezer compartment. Using a Phillips screwdriver, unscrew and remove the shroud around the fan motor. Rotate the fan blade counterclockwise until it detaches and then remove it. Unscrew the two screws that secure the fan motor cover, then carefully lift the cover off. Disconnect the wiring harness from the fan motor, then using an 8mm socket wrench, loosen and remove the two screws that secure the fan motor.
Step Four: Install the New Motor
Now it’s time to install the new fan motor. Connect the wiring harness to the new fan motor, then secure it with the two mounting screws you removed earlier. Do not overtighten the screws, as this could cause damage to the fan motor. Reattach the fan blade and shroud, making sure to securely tighten them.
Step Five: Reassemble the Freezer
Reattach the fan motor cover, then reattach the back panel and shelves to the freezer compartment. Plug the refrigerator back in, and you’re done!
Congratulations! You’ve just replaced the 4389144 Whirlpool Refrigerator EVAPORATOR FAN MOTOR. Now your refrigerator will run more efficiently and quietly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your refrigerator is working too hard, or making strange noises, it might be time to check the evaporator fan motor. A faulty fan motor can cause your refrigerator to work harder and create more noise. To make sure your refrigerator isn't running inefficiently, follow these steps to replace a 4389144 Whirlpool Refrigerator EVAPORATOR FAN MOTOR.
Tools You’ll Need:
• Phillips screwdriver
• Flathead screwdriver
• 8mm socket wrench
• Replacement 4389144 Whirlpool Refrigerator EVAPORATOR FAN MOTOR
Step One: Unplug the Refrigerator
Before you begin any repairs, disconnect the appliance from its power supply. This step helps ensure your safety throughout the repair process.
Step Two: Access the Fan Motor
Remove any food stored in the freezer. Carefully push the basket out of the way, then remove the shelves. Remove the back panel in the freezer compartment by unscrewing the screws that secure it.
Step Three: Remove the Fan Motor
The fan motor is located at the bottom of the freezer compartment. Using a Phillips screwdriver, unscrew and remove the shroud around the fan motor. Rotate the fan blade counterclockwise until it detaches and then remove it. Unscrew the two screws that secure the fan motor cover, then carefully lift the cover off. Disconnect the wiring harness from the fan motor, then using an 8mm socket wrench, loosen and remove the two screws that secure the fan motor.
Step Four: Install the New Motor
Now it’s time to install the new fan motor. Connect the wiring harness to the new fan motor, then secure it with the two mounting screws you removed earlier. Do not overtighten the screws, as this could cause damage to the fan motor. Reattach the fan blade and shroud, making sure to securely tighten them.
Step Five: Reassemble the Freezer
Reattach the fan motor cover, then reattach the back panel and shelves to the freezer compartment. Plug the refrigerator back in, and you’re done!
Congratulations! You’ve just replaced the 4389144 Whirlpool Refrigerator EVAPORATOR FAN MOTOR. Now your refrigerator will run more efficiently and quietly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
