Online Sale!
100% Guaranteed Genuine Parts
WPW10359272 Whirlpool Dryer Drum Support Roller Shaft
The Dryer Drum Roller Axle allows the appliance’s roller to maintain quiet and constant spinning during the drying cycle. If your dryer is noisy while operating, replacing this part may alleviate the issue. This is a rear left-hand thread shaft that measures approx. 2-1/2" L. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: This is an updated part; if your dryer is an older model, you may also need to replace the mounting nuts(WPW10080190) and washers (W11236646 and WPW10512946) to complete this repair.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Roller Axle
• Tools Needed: Multi screwdriver, putty knife and 9/16" socket
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Roller Axle
• Tools Needed: Multi screwdriver, putty knife and 9/16" socket
Weight : 0.048500 lbs
Dimension : 3.543300 x 3.228300 x 0.590500
Compatible Brands
About this product
The Dryer Drum Roller Axle allows the appliance’s roller to maintain quiet and constant spinning during the drying cycle. If your dryer is noisy while operating, replacing this part may alleviate the issue. This is a rear left-hand thread shaft that measures approx. 2-1/2" L. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: This is an updated part; if your dryer is an older model, you may also need to replace the mounting nuts(WPW10080190) and washers (W11236646 and WPW10512946) to complete this repair.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Roller Axle
• Tools Needed: Multi screwdriver, putty knife and 9/16" socket
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Roller Axle
• Tools Needed: Multi screwdriver, putty knife and 9/16" socket
Weight : 0.048500 lbs
Dimension : 3.543300 x 3.228300 x 0.590500
The following parts are replaced by this product
- 3399509
- 8575325
- W10359272
No more associated models for this part.
DIY: Replacing the Whirlpool WPW10359272 Shaft
1. Shut off power to the appliance. Unplug the power cord or turn off the circuit breaker supplying power to the appliance.
2. Disconnect wires and hoses connected to the appliance. Refer to your owner's manual to ensure you disconnect all necessary lines connected to the appliance.
3. Open the appliance. Refer to your user’s manual for instructions on how to open the appliance.
4. Remove the existing shaft. The existing shaft is usually held in place with screws, so you will need to remove them first.
5. Install the new Whirlpool WPW10359272 shaft. Use the screws that you removed from the old shaft and use them to affix the new shaft in place.
6. Re-attach wires and hoses. Refer to your user’s manual for instructions on how to properly re-attach the wires and hoses.
7. Close the appliance. Refer to your user’s manual for instructions on closing the appliance.
8. Plug in the power cord or turn on the circuit breaker, and power on the appliance.
Congratulations! You have successfully replaced the Whirlpool WPW10359272 shaft.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off power to the appliance. Unplug the power cord or turn off the circuit breaker supplying power to the appliance.
2. Disconnect wires and hoses connected to the appliance. Refer to your owner's manual to ensure you disconnect all necessary lines connected to the appliance.
3. Open the appliance. Refer to your user’s manual for instructions on how to open the appliance.
4. Remove the existing shaft. The existing shaft is usually held in place with screws, so you will need to remove them first.
5. Install the new Whirlpool WPW10359272 shaft. Use the screws that you removed from the old shaft and use them to affix the new shaft in place.
6. Re-attach wires and hoses. Refer to your user’s manual for instructions on how to properly re-attach the wires and hoses.
7. Close the appliance. Refer to your user’s manual for instructions on closing the appliance.
8. Plug in the power cord or turn on the circuit breaker, and power on the appliance.
Congratulations! You have successfully replaced the Whirlpool WPW10359272 shaft.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review