WP8066184 Whirlpool Dryer Motor Pulley
This Dryer Motor Pulley rotates to turn the dryer’s drum belt, which spins the drum during the drying cycle. If your dryer makes a persistent squealing sound during operation, the drum rotates intermittently but clunks or the drum does not rotate at all, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Motor Pulley
• Tools Needed: Multi screwdriver, adjustable wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Motor Pulley
• Tools Needed: Multi screwdriver, adjustable wrench
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dryer Motor Pulley rotates to turn the dryer’s drum belt, which spins the drum during the drying cycle. If your dryer makes a persistent squealing sound during operation, the drum rotates intermittently but clunks or the drum does not rotate at all, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Motor Pulley
• Tools Needed: Multi screwdriver, adjustable wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Motor Pulley
• Tools Needed: Multi screwdriver, adjustable wrench
Write Your Own Review
The following parts are replaced by this product
- 3389627
- 694871
- 3394341
- 8066184
- W10299847
- 8578565
Replacing the WP8066184 Whirlpool Dryer Motor Pulley
Tools You Will Need:
-Phillips head screwdriver
-Standard flathead screwdriver
-Wrench or ratchet set
-Replacement WP8066184 pulley
Step 1: Disconnect the dryer from power source.
Step 2: Open the dryer’s cabinet. This can be done by unscrewing the two Phillips head screws located on the top of the unit.
Step 3: Unscrew the four screws attaching the front panel to the dryer.
Step 4: Carefully remove the front panel and set it aside.
Step 5: Using the wrench or ratchet set, loosen and remove the inner ring of the retaining ring that holds the motor pulley in place.
Step 6: Once the retaining ring has been removed, pull the old motor pulley off the shaft.
Step 7: Take the replacement pulley, place it onto the motor shaft, and secure it with the retaining ring.
Step 8: Reattach the front panel of the dryer and replace the two Phillips head screws.
Step 9: Reconnect the dryer to the power source.
You have successfully replaced the WP8066184 Whirlpool Dryer Motor Pulley!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools You Will Need:
-Phillips head screwdriver
-Standard flathead screwdriver
-Wrench or ratchet set
-Replacement WP8066184 pulley
Step 1: Disconnect the dryer from power source.
Step 2: Open the dryer’s cabinet. This can be done by unscrewing the two Phillips head screws located on the top of the unit.
Step 3: Unscrew the four screws attaching the front panel to the dryer.
Step 4: Carefully remove the front panel and set it aside.
Step 5: Using the wrench or ratchet set, loosen and remove the inner ring of the retaining ring that holds the motor pulley in place.
Step 6: Once the retaining ring has been removed, pull the old motor pulley off the shaft.
Step 7: Take the replacement pulley, place it onto the motor shaft, and secure it with the retaining ring.
Step 8: Reattach the front panel of the dryer and replace the two Phillips head screws.
Step 9: Reconnect the dryer to the power source.
You have successfully replaced the WP8066184 Whirlpool Dryer Motor Pulley!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
