Online Sale!
100% Guaranteed Genuine Parts
WP697813 Whirlpool Seal
Whirlpool WP697813 SEALING We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.202100 lbs
Dimension : 8.385800 x 1.850300 x 1.811000
Compatible Brands
About this product
Whirlpool WP697813 SEALING We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.202100 lbs
Dimension : 8.385800 x 1.850300 x 1.811000
The following parts are replaced by this product
- 697813
- 697814
No more associated models for this part.
DIY Guide: How to Replace the Whirlpool WP697813 Seal
Replacing the Whirlpool WP697813 seal is an easy task with the help of a few tools. All you need is a screwdriver, some lubricant, and a new seal. Follow these steps to successfully replace the seal:
1. Unplug the appliance and let it cool down completely before beginning the repair.
2. Remove the door from the appliance and locate the old seal.
3. Carefully unscrew the existing seal and remove it from the appliance.
4. Clean the area where the seal used to be.
5. Apply a thin layer of lubricant to the new seal so it slides into place easily.
6. Carefully insert the new seal into the appliance.
7. Tighten the screws that secure the seal in place.
8. Reattach the door and plug the appliance back in.
And you’re all done! You’ve successfully replaced the Whirlpool WP697813 seal. If you found this DIY guide helpful, please share it with your friends on social media to help out other DIYers looking for instructions on replacing seals.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool WP697813 seal is an easy task with the help of a few tools. All you need is a screwdriver, some lubricant, and a new seal. Follow these steps to successfully replace the seal:
1. Unplug the appliance and let it cool down completely before beginning the repair.
2. Remove the door from the appliance and locate the old seal.
3. Carefully unscrew the existing seal and remove it from the appliance.
4. Clean the area where the seal used to be.
5. Apply a thin layer of lubricant to the new seal so it slides into place easily.
6. Carefully insert the new seal into the appliance.
7. Tighten the screws that secure the seal in place.
8. Reattach the door and plug the appliance back in.
And you’re all done! You’ve successfully replaced the Whirlpool WP697813 seal. If you found this DIY guide helpful, please share it with your friends on social media to help out other DIYers looking for instructions on replacing seals.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review