Online Sale!
100% Guaranteed Genuine Parts
WPW10358149 Whirlpool Hose
This Top Load Washer Inner Drain Hose carries drain water from the water pump to the external drain hose at the wall. To access the part, remove the control panel of your washer, then slide the panel open. Remove the spring clips that hold the body to the frame of the washer and remove the cabinet from the washer. When disconnecting any hoses, place a towel down to catch any water. This part includes the clamp. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn the water supply off to the washer. Recommended Item: Hose Clamp (item WP285655). Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Inner Drain Hose
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Inner Drain Hose
• Tools Needed: Multi screwdriver
Weight : 174.569900 lbs
Dimension : 39.540000 x 23.540000 x 26.070000
Compatible Brands
About this product
This Top Load Washer Inner Drain Hose carries drain water from the water pump to the external drain hose at the wall. To access the part, remove the control panel of your washer, then slide the panel open. Remove the spring clips that hold the body to the frame of the washer and remove the cabinet from the washer. When disconnecting any hoses, place a towel down to catch any water. This part includes the clamp. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn the water supply off to the washer. Recommended Item: Hose Clamp (item WP285655). Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Inner Drain Hose
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Inner Drain Hose
• Tools Needed: Multi screwdriver
Weight : 174.569900 lbs
Dimension : 39.540000 x 23.540000 x 26.070000
The following parts are replaced by this product
- 3361805
- 3361809
- 3349018
- 3355497
- 3357024
- 63206
- 8317940
- 3976399
- W10358149
- WP3976399
No more associated models for this part.
Replacing the Whirlpool WPW10358149 Hose
1. Unplug the washing machine from the wall and turn off any water supply for the washer.
2. If necessary, remove the bottom access panel to gain access to the hose.
3. Disconnect the old Whirlpool hose by pressing down on the retaining clips and gently pulling the hose away from the connections.
4. Cut off any clamps that may be attached to the hose using a pair of pliers.
5. Insert the new hose into the connections, making sure that it is completely threaded in.
6. Use a pair of pliers to secure the hose by attaching a new clamp.
7. Plug the power cord back into the wall and turn the water supply back on.
8. Test the new hose connection by running a short cycle on the washer.
9. Make sure that there are no leaks from the hose before replacing the bottom access panel.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washing machine from the wall and turn off any water supply for the washer.
2. If necessary, remove the bottom access panel to gain access to the hose.
3. Disconnect the old Whirlpool hose by pressing down on the retaining clips and gently pulling the hose away from the connections.
4. Cut off any clamps that may be attached to the hose using a pair of pliers.
5. Insert the new hose into the connections, making sure that it is completely threaded in.
6. Use a pair of pliers to secure the hose by attaching a new clamp.
7. Plug the power cord back into the wall and turn the water supply back on.
8. Test the new hose connection by running a short cycle on the washer.
9. Make sure that there are no leaks from the hose before replacing the bottom access panel.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review