Online Sale!
100% Guaranteed Genuine Parts
WPW10074580 Whirlpool Agitator Inner Cap and Seal
This Top Load Washer Agitator Dust Cap fits over the top of the agitator to protect the inner components of the part during operation. If the current cap for your agitator has been lost, damaged or deformed, you can easily replace it with this item. This part also includes the seal. Replacing this part may require basic hand tools and minor disassembly of the washing machine (depending on your model). You will not need previous repair experience. Be sure to unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. You must also turn off the hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Dust Cap
• Tools Needed: Flat-blade screwdriver (certain models)
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Dust Cap
• Tools Needed: Flat-blade screwdriver (certain models)
Weight : 0.105300 lbs
Dimension : 3.430000 x 3.070000 x 1.380000
Compatible Brands
About this product
This Top Load Washer Agitator Dust Cap fits over the top of the agitator to protect the inner components of the part during operation. If the current cap for your agitator has been lost, damaged or deformed, you can easily replace it with this item. This part also includes the seal. Replacing this part may require basic hand tools and minor disassembly of the washing machine (depending on your model). You will not need previous repair experience. Be sure to unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. You must also turn off the hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Dust Cap
• Tools Needed: Flat-blade screwdriver (certain models)
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Dust Cap
• Tools Needed: Flat-blade screwdriver (certain models)
Weight : 0.105300 lbs
Dimension : 3.430000 x 3.070000 x 1.380000
The following parts are replaced by this product
- 285551
- 3347290
- 3354733
- W10074580
No more associated models for this part.
Replacing the WPW10074580 Whirlpool Agitator Cap
Are you having issues with your Whirlpool agitator cap? Not to worry, replacing this part is a relatively simple DIY project. Here are the steps you need to follow to replace the WPW10074580 Whirlpool agitator cap.
1. Unplug the washing machine from the wall outlet and turn off the water valve.
2. Remove the cap from the center of the agitator by prying off the lid with a flat head screwdriver.
3. Inspect the splines located in the center of the agitator and check for any defects or signs of wear. If the splines look worn out, you will need to replace them as well before you can install the new cap.
4. Take the old agitator cap out of the machine and compare it to the new one you purchased to ensure it is the correct size.
5. Place the new cap into the center of the agitator and make sure the splines line up correctly with the shaft.
6. Secure the cap in place by pushing down on the lid firmly until it snaps into place.
7. Re-attach the water lines and plug the washing machine back into the power outlet.
8. Test the machine to make sure the cap is securely in place and the agitator is turning properly.
Congratulations, you’ve successfully replaced your WPW10074580 Whirlpool agitator cap!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you having issues with your Whirlpool agitator cap? Not to worry, replacing this part is a relatively simple DIY project. Here are the steps you need to follow to replace the WPW10074580 Whirlpool agitator cap.
1. Unplug the washing machine from the wall outlet and turn off the water valve.
2. Remove the cap from the center of the agitator by prying off the lid with a flat head screwdriver.
3. Inspect the splines located in the center of the agitator and check for any defects or signs of wear. If the splines look worn out, you will need to replace them as well before you can install the new cap.
4. Take the old agitator cap out of the machine and compare it to the new one you purchased to ensure it is the correct size.
5. Place the new cap into the center of the agitator and make sure the splines line up correctly with the shaft.
6. Secure the cap in place by pushing down on the lid firmly until it snaps into place.
7. Re-attach the water lines and plug the washing machine back into the power outlet.
8. Test the machine to make sure the cap is securely in place and the agitator is turning properly.
Congratulations, you’ve successfully replaced your WPW10074580 Whirlpool agitator cap!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review