WP3392519 Whirlpool Thermal Fuse
Part #: WPL WP3392519
Whirlpool - Sears KitchenAid - Kenmore - Roper One time thermal fuse for dryers 3392519
● Located near the blower wheel, this is a common cause of no heat for your dryer.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
● Located near the blower wheel, this is a common cause of no heat for your dryer.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool - Sears KitchenAid - Kenmore - Roper One time thermal fuse for dryers 3392519
● Located near the blower wheel, this is a common cause of no heat for your dryer.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
● Located near the blower wheel, this is a common cause of no heat for your dryer.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- 3392519
- ET401
- ET401GL
- 3388651
- 694511
How to Replace the WP3392519 Whirlpool Thermal Fuse
If your Whirlpool dryer is not working properly, it may be due to a faulty thermal fuse. Replacing the WP3392519 Whirlpool thermal fuse is a relatively simple DIY task. Follow these steps and you will have your Whirlpool dryer running again in no time!
Tools Needed:
-Phillips screwdriver
-Flathead screwdriver
Instructions:
1. Unplug the power cord of your Whirlpool dryer from the outlet. This is for your safety.
2. Locate and remove the back panel of the dryer. The panel is usually held in place with Phillips screws.
3. Remove the old thermal fuse, which is located on top of the blower housing. Use the flathead screwdriver to loosen the mounting screws.
4. Replace the old thermal fuse with the new one. Secure it with the mounting screws.
5. Reattach the back panel of the dryer and plug the power cord back into the outlet.
6. Turn the dryer on and make sure it is working properly.
Congratulations! You have just replaced the WP3392519 Whirlpool thermal fuse. Enjoy your now-working Whirlpool dryer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your Whirlpool dryer is not working properly, it may be due to a faulty thermal fuse. Replacing the WP3392519 Whirlpool thermal fuse is a relatively simple DIY task. Follow these steps and you will have your Whirlpool dryer running again in no time!
Tools Needed:
-Phillips screwdriver
-Flathead screwdriver
Instructions:
1. Unplug the power cord of your Whirlpool dryer from the outlet. This is for your safety.
2. Locate and remove the back panel of the dryer. The panel is usually held in place with Phillips screws.
3. Remove the old thermal fuse, which is located on top of the blower housing. Use the flathead screwdriver to loosen the mounting screws.
4. Replace the old thermal fuse with the new one. Secure it with the mounting screws.
5. Reattach the back panel of the dryer and plug the power cord back into the outlet.
6. Turn the dryer on and make sure it is working properly.
Congratulations! You have just replaced the WP3392519 Whirlpool thermal fuse. Enjoy your now-working Whirlpool dryer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
