Online Sale!
100% Guaranteed Genuine Parts
22003428 Whirlpool Adjustable Leg (with Nut)
This Top Load Washer Leveling Leg is a metal replacement part that allows your appliance to sit perfectly flat. A stop nut is also included with this item. Install the new leveling leg and test to see if you have it adjusted properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Replacing this part will require basic hand tools, but no disassembly or repair experience. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Leveling Leg
• Tools Needed: Standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Leveling Leg
• Tools Needed: Standard pliers
Weight : 0.146500 lbs
Dimension : 5.000000 x 3.110000 x 1.300000
Compatible Brands
About this product
This Top Load Washer Leveling Leg is a metal replacement part that allows your appliance to sit perfectly flat. A stop nut is also included with this item. Install the new leveling leg and test to see if you have it adjusted properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Replacing this part will require basic hand tools, but no disassembly or repair experience. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Leveling Leg
• Tools Needed: Standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Leveling Leg
• Tools Needed: Standard pliers
Weight : 0.146500 lbs
Dimension : 5.000000 x 3.110000 x 1.300000
The following parts are replaced by this product
- 302699
- 310934
- 312375
- 40039001
No more associated models for this part.
DIY Instructions for Replacing the Whirlpool 22003428 LEG, ADJUSTABLE (W/NUT):
1. Gather the necessary tools and supplies. You will need a Phillips-head screwdriver, adjustable wrench, and a new Whirlpool 22003428 LEG, ADJUSTABLE (W/NUT).
2. Cut off the power supply to the appliance. Unplug the appliance or shut off the breaker.
3. Remove any screws fastening the leg to the appliance by unscrewing them with a Phillips-head screwdriver.
4. Pull out the old leg from the appliance.
5. Insert the new leg into the appliance. Secure it in place with the supplied screws.
6. Use an adjustable wrench to securely tighten the nut onto the leg.
7. Restore the power supply to the appliance.
You have now successfully replaced theWhirlpool 22003428 LEG, ADJUSTABLE (W/NUT).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather the necessary tools and supplies. You will need a Phillips-head screwdriver, adjustable wrench, and a new Whirlpool 22003428 LEG, ADJUSTABLE (W/NUT).
2. Cut off the power supply to the appliance. Unplug the appliance or shut off the breaker.
3. Remove any screws fastening the leg to the appliance by unscrewing them with a Phillips-head screwdriver.
4. Pull out the old leg from the appliance.
5. Insert the new leg into the appliance. Secure it in place with the supplied screws.
6. Use an adjustable wrench to securely tighten the nut onto the leg.
7. Restore the power supply to the appliance.
You have now successfully replaced theWhirlpool 22003428 LEG, ADJUSTABLE (W/NUT).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review