Online Sale!
100% Guaranteed Genuine Parts
WP2195916K Whirlpool End Cap
The Refrigerator Door Shelf Retainer Bar End Cap connects to the retainer bar on your refrigerator’s door shelf, and attaches it to the refrigerator door. If your shelf retainer bar has become disconnected, a damaged end cap could be the cause. To remove the end cap, first unhook the release tab on both ends of the retainer bar. Slide out the bar and the end caps, and slide out the defective cap. Now, simply replace the end cap and snap the bar with end caps back in place on the refrigerator door. This part is made of white plastic and is sold individually. Installation will require basic hand tools, minor disassembly of the unit and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Weight : 0.154500 lbs
Dimension : 3.464500 x 3.149600 x 1.968500
Compatible Brands
About this product
The Refrigerator Door Shelf Retainer Bar End Cap connects to the retainer bar on your refrigerator’s door shelf, and attaches it to the refrigerator door. If your shelf retainer bar has become disconnected, a damaged end cap could be the cause. To remove the end cap, first unhook the release tab on both ends of the retainer bar. Slide out the bar and the end caps, and slide out the defective cap. Now, simply replace the end cap and snap the bar with end caps back in place on the refrigerator door. This part is made of white plastic and is sold individually. Installation will require basic hand tools, minor disassembly of the unit and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Weight : 0.154500 lbs
Dimension : 3.464500 x 3.149600 x 1.968500
The following parts are replaced by this product
- 2195916
- 2156002
- 2195916K
No more associated models for this part.
Replacing the WP2195916K Whirlpool End Cap
Replacing a Whirlpool end cap can be a relatively simple repair job with the right tools and knowledge. This tutorial will walk you through the steps needed to safely and properly replace the WP2195916K Whirlpool end cap.
Tools Needed:
#1 Phillips head screwdriver, flashlight
Instructions:
1. Unplug the appliance from the electrical source before attempting any repairs.
2. Carefully inspect the end cap for any damage or excessive wear. If there is any significant damage to the cap, it should be replaced with a new one.
3. Remove the screws on the exterior of the end cap, using a #1 Phillips head screwdriver.
4. Pull the end cap away from the washer to access the interior.
5. Look inside the end cap to identify the old part. Make sure to check all around the edges where the part number may be located.
6. Disconnect the electrical and water connections from the old part, making sure to note which connections correspond to each.
7. Pull the old part out and discard.
8. Install the new end cap in the reverse order as above, making sure to securely connect the electrical and water connections.
9. Insert the new end cap screws into the exterior of the end cap and securely fasten.
10. Plug the appliance back into the electrical source and test for proper operation.
Your Whirlpool end cap should now be replaced. It is important to follow the steps above carefully and to use the appropriate tools to ensure a successful repair. Properly maintaining your appliance will ensure years of reliable service.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a Whirlpool end cap can be a relatively simple repair job with the right tools and knowledge. This tutorial will walk you through the steps needed to safely and properly replace the WP2195916K Whirlpool end cap.
Tools Needed:
#1 Phillips head screwdriver, flashlight
Instructions:
1. Unplug the appliance from the electrical source before attempting any repairs.
2. Carefully inspect the end cap for any damage or excessive wear. If there is any significant damage to the cap, it should be replaced with a new one.
3. Remove the screws on the exterior of the end cap, using a #1 Phillips head screwdriver.
4. Pull the end cap away from the washer to access the interior.
5. Look inside the end cap to identify the old part. Make sure to check all around the edges where the part number may be located.
6. Disconnect the electrical and water connections from the old part, making sure to note which connections correspond to each.
7. Pull the old part out and discard.
8. Install the new end cap in the reverse order as above, making sure to securely connect the electrical and water connections.
9. Insert the new end cap screws into the exterior of the end cap and securely fasten.
10. Plug the appliance back into the electrical source and test for proper operation.
Your Whirlpool end cap should now be replaced. It is important to follow the steps above carefully and to use the appropriate tools to ensure a successful repair. Properly maintaining your appliance will ensure years of reliable service.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review