Online Sale!
100% Guaranteed Genuine Parts
WP74003019 Whirlpool Oven Bake Element
This Oven Lower Bake Element is a replacement part for the lower oven heating element that provides constant heat when cooking. If your oven does not bake properly, replacing this part may alleviate the issue. This part features a male spade connection with push-on wire terminals. Be mindful not to let the wires connected to the current part fall back inside the oven when you disconnect them; retrieval of the wires will require additional steps during the installation process. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Phillips-Head screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Phillips-Head screwdriver
Weight : 10.766900 lbs
Dimension : 21.690000 x 3.190000 x 21.630000
Compatible Brands
About this product
This Oven Lower Bake Element is a replacement part for the lower oven heating element that provides constant heat when cooking. If your oven does not bake properly, replacing this part may alleviate the issue. This part features a male spade connection with push-on wire terminals. Be mindful not to let the wires connected to the current part fall back inside the oven when you disconnect them; retrieval of the wires will require additional steps during the installation process. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Phillips-Head screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Phillips-Head screwdriver
Weight : 10.766900 lbs
Dimension : 21.690000 x 3.190000 x 21.630000
The following parts are replaced by this product
- 74003019
- 04000058
- 7406P064-60
- 7406P092-60
- 7019
No more associated models for this part.
Step 1: Unplug the range.
Step 2: Remove the access panel.
Step 3: Remove the wires connected to the Bake Element.
Step 4: Carefully pull out the element from the back of the oven.
Step 5: Place the WP74003019 Whirlpool Range Oven Bake Element in the same position as the old one.
Step 6: Reattach the wires onto the new Bake Element.
Step 7: Secure the Bake Element with the screws.
Step 8: Replace the access panel.
Step 9: Plug in the range.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the access panel.
Step 3: Remove the wires connected to the Bake Element.
Step 4: Carefully pull out the element from the back of the oven.
Step 5: Place the WP74003019 Whirlpool Range Oven Bake Element in the same position as the old one.
Step 6: Reattach the wires onto the new Bake Element.
Step 7: Secure the Bake Element with the screws.
Step 8: Replace the access panel.
Step 9: Plug in the range.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review