W10408179 Whirlpool Ice Maker Water Inlet Fill Valve Kit
The SxS Refrigerator Water Inlet Valve allows water to enter the refrigerator’s water dispenser and ice maker. The package includes a new water valve, instructions, ¼-in tubing and a plastic ¼-in coupler. If your appliance isn't dispensing ice or water properly, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: Some refrigerator models also require a separate connection fitting (Tubing Coupler, item 2119001).
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Water Inlet Valve
• Tools Needed: 1/2" wrench and nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Water Inlet Valve
• Tools Needed: 1/2" wrench and nut driver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The SxS Refrigerator Water Inlet Valve allows water to enter the refrigerator’s water dispenser and ice maker. The package includes a new water valve, instructions, ¼-in tubing and a plastic ¼-in coupler. If your appliance isn't dispensing ice or water properly, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: Some refrigerator models also require a separate connection fitting (Tubing Coupler, item 2119001).
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Water Inlet Valve
• Tools Needed: 1/2" wrench and nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Water Inlet Valve
• Tools Needed: 1/2" wrench and nut driver
Write Your Own Review
The following parts are replaced by this product
- 2205762
- 2186486
- 4389177
- 2188622
- 2304757
How to Replace a Whirlpool Ice Maker Water Inlet Fill Valve Kit (W10408179)
If your ice maker isn’t producing enough or any ice, or if you have water leaking from it, it may be time to replace the W10408179 Whirlpool Ice Maker Water Inlet Fill Valve Kit. Replacing this part is a fairly simple DIY job that can help get your ice maker back up and running in no time. Here’s what you need to do:
1. Shut off the water supply. Locate the water shutoff valve for your ice maker and turn it off to stop any water flow.
2. Disconnect the water line. Pull out the water line and disconnect it from the fill valve.
3. Remove the old fill valve. Using a wrench or screwdriver, unscrew the screws that secure the fill valve in place and then pull it out from the back of the ice maker.
4. Install the new fill valve. Slide the new valve into the space where the old one was and secure it with the screws.
5. Reconnect the water line. Plug the water line back into the fill valve and make sure it is fitted securely.
6. Turn on the water supply. Turn on the water shutoff valve and check for any leaks.
7. Test your ice maker. Put the ice maker into test mode and watch as it begins to fill with water. If all is working properly, your ice maker should start producing ice.
Your Whirlpool Ice Maker Water Inlet Fill Valve Kit (W10408179) has now been successfully replaced. If you notice any further issues, contact a qualified technician for further assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your ice maker isn’t producing enough or any ice, or if you have water leaking from it, it may be time to replace the W10408179 Whirlpool Ice Maker Water Inlet Fill Valve Kit. Replacing this part is a fairly simple DIY job that can help get your ice maker back up and running in no time. Here’s what you need to do:
1. Shut off the water supply. Locate the water shutoff valve for your ice maker and turn it off to stop any water flow.
2. Disconnect the water line. Pull out the water line and disconnect it from the fill valve.
3. Remove the old fill valve. Using a wrench or screwdriver, unscrew the screws that secure the fill valve in place and then pull it out from the back of the ice maker.
4. Install the new fill valve. Slide the new valve into the space where the old one was and secure it with the screws.
5. Reconnect the water line. Plug the water line back into the fill valve and make sure it is fitted securely.
6. Turn on the water supply. Turn on the water shutoff valve and check for any leaks.
7. Test your ice maker. Put the ice maker into test mode and watch as it begins to fill with water. If all is working properly, your ice maker should start producing ice.
Your Whirlpool Ice Maker Water Inlet Fill Valve Kit (W10408179) has now been successfully replaced. If you notice any further issues, contact a qualified technician for further assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
