WP308180 Whirlpool Range Wall Oven Bake Element 2600W 240V
This Oven Lower Bake Element is a replacement part that provides constant heat from the lower oven when cooking. If your oven does not bake properly, check to see if there is a burned-out section of the element and replace if needed. 2600 watt. 240 volt. Element measures 16-5/8" W x 15-3/4" L. Helpful Tip: Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Oven Lower Bake Element is a replacement part that provides constant heat from the lower oven when cooking. If your oven does not bake properly, check to see if there is a burned-out section of the element and replace if needed. 2600 watt. 240 volt. Element measures 16-5/8" W x 15-3/4" L. Helpful Tip: Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- 308180
- 311470
- 311652
- 313827
- 660576
- 661170
- 90308180
- 308180BULK
Step by Step Instructions for Replacing the WP308180 Whirlpool Range / Wall Oven Bake Element, 2600W 240V
1. Disconnect the power supply to the Whirlpool wall oven by unplugging the unit from the wall outlet or turning off the circuit breaker.
2. Take off the oven door using a flat blade screwdriver to remove the screws attaching it.
3. Remove the oven racks.
4. Reach into the back of the oven cavity and unscrew the mounting screws on the bake element.
5. Pull the bake element out of the oven and take note of the wires connecting it to the rear wall.
6. Disconnect the wires from the old bake element.
7. Install the WP308180 Whirlpool bake element in the oven cavity.
8. Connect the wires from the oven to the new bake element.
9. Replace the oven racks and oven door.
10. Reconnect the power supply to the Whirlpool wall oven.
Congratulations, you have successfully replaced your WP308180 Whirlpool Range / Wall Oven Bake Element!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Disconnect the power supply to the Whirlpool wall oven by unplugging the unit from the wall outlet or turning off the circuit breaker.
2. Take off the oven door using a flat blade screwdriver to remove the screws attaching it.
3. Remove the oven racks.
4. Reach into the back of the oven cavity and unscrew the mounting screws on the bake element.
5. Pull the bake element out of the oven and take note of the wires connecting it to the rear wall.
6. Disconnect the wires from the old bake element.
7. Install the WP308180 Whirlpool bake element in the oven cavity.
8. Connect the wires from the oven to the new bake element.
9. Replace the oven racks and oven door.
10. Reconnect the power supply to the Whirlpool wall oven.
Congratulations, you have successfully replaced your WP308180 Whirlpool Range / Wall Oven Bake Element!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
