Online Sale!
100% Guaranteed Genuine Parts
8184109 Whirlpool Microwave Spacer
8184109 Whirlpool Microwave Spacer
Weight : 0.007200 lbs
Dimension : 1.000000 x 1.000000 x 0.120000
Compatible Brands
About this product
8184109 Whirlpool Microwave Spacer
Weight : 0.007200 lbs
Dimension : 1.000000 x 1.000000 x 0.120000
The following parts are replaced by this product
- 8206101
Replacing the Whirlpool 8184109 SPACER
DIY Guide: How to Replace a Whirlpool 8184109 SPACER
Items You Will Need:
• Screwdriver
• Pliers
• New Whirlpool 8184109 SPACER
Instructions:
1. Before you start, make sure that the power to your appliance has been turned off.
2. Use a screwdriver to remove the screws that hold together the parts of the appliance housing around the old spacer.
3. With pliers, carefully disconnect all wires or hoses connected to the spacer and then remove it from the appliance.
4. Place the new Whirlpool 8184109 SPACER in the opening, making sure it is lined up correctly.
5. Reconnect any wires or hoses that you disconnected when removing the old spacer.
6. Secure the spacer in place using the screws removed earlier.
7. Turn the power back on and test the appliance to ensure the spacer replacement was successful.
Using these steps should help you replace the Whirlpool 8184109 SPACER quickly and easily. Make sure to follow the manufacturer’s instructions for your specific appliance. If you have any issues with the installation, reach out to a qualified professional for further assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Guide: How to Replace a Whirlpool 8184109 SPACER
Items You Will Need:
• Screwdriver
• Pliers
• New Whirlpool 8184109 SPACER
Instructions:
1. Before you start, make sure that the power to your appliance has been turned off.
2. Use a screwdriver to remove the screws that hold together the parts of the appliance housing around the old spacer.
3. With pliers, carefully disconnect all wires or hoses connected to the spacer and then remove it from the appliance.
4. Place the new Whirlpool 8184109 SPACER in the opening, making sure it is lined up correctly.
5. Reconnect any wires or hoses that you disconnected when removing the old spacer.
6. Secure the spacer in place using the screws removed earlier.
7. Turn the power back on and test the appliance to ensure the spacer replacement was successful.
Using these steps should help you replace the Whirlpool 8184109 SPACER quickly and easily. Make sure to follow the manufacturer’s instructions for your specific appliance. If you have any issues with the installation, reach out to a qualified professional for further assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review