WP60106-35 Whirlpool Defrost Heater Assembly
Maytag - Admiral - Norge - Magic Chef - Sears Kenmore - Amana - Jenn-Air Refrigerator Defrost Heater 60106-35
● Single tube glass
● 1/4" Male and Female Spades
● Approximately 20 1/4" Long
● 550W
● 120V
We are an Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
● Single tube glass
● 1/4" Male and Female Spades
● Approximately 20 1/4" Long
● 550W
● 120V
We are an Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Maytag - Admiral - Norge - Magic Chef - Sears Kenmore - Amana - Jenn-Air Refrigerator Defrost Heater 60106-35
● Single tube glass
● 1/4" Male and Female Spades
● Approximately 20 1/4" Long
● 550W
● 120V
We are an Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
● Single tube glass
● 1/4" Male and Female Spades
● Approximately 20 1/4" Long
● 550W
● 120V
We are an Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- 60106-35
- 60106-14
- 60106-2
- 60106-20
- 60106-26
- 60106-29
Step 1: Before starting the project, make sure that the power is off to the refrigerator. Locate and unplug the fridge to ensure safety.
Step 2: Use a Phillips head screwdriver to unscrew the panel screws from the back panel of the refrigerator. Lift up the panel and remove it from the fridge.
Step 3: Locate the WP60106-35 Whirlpool Defrost Heater and unplug it from the wiring harness.
Step 4: Carefully slide out the old heater from the rear of the refrigerator.
Step 5: Clean the mounting surface with a damp cloth to remove any dirt or residue.
Step 6: Insert the new WP60106-35 Whirlpool Defrost Heater into the rear of the fridge and plug it in to the wiring harness.
Step 7: Secure the heater in place with screws you removed in step 2.
Step 8: Replace the back panel and re-secure it with the screws from step 2.
Step 9: Reconnect the power to the fridge, plug it in and carefully test the new WP60106-35 Whirlpool Defrost Heater.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Use a Phillips head screwdriver to unscrew the panel screws from the back panel of the refrigerator. Lift up the panel and remove it from the fridge.
Step 3: Locate the WP60106-35 Whirlpool Defrost Heater and unplug it from the wiring harness.
Step 4: Carefully slide out the old heater from the rear of the refrigerator.
Step 5: Clean the mounting surface with a damp cloth to remove any dirt or residue.
Step 6: Insert the new WP60106-35 Whirlpool Defrost Heater into the rear of the fridge and plug it in to the wiring harness.
Step 7: Secure the heater in place with screws you removed in step 2.
Step 8: Replace the back panel and re-secure it with the screws from step 2.
Step 9: Reconnect the power to the fridge, plug it in and carefully test the new WP60106-35 Whirlpool Defrost Heater.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
