WP3390719 Whirlpool Dryer Thermal Fuse
This Front Load Dryer Thermal Cut Off Fuse is a safety device designed to protect the dryer from overheating. If your dryer won't start, won't produce heat, shuts off too soon or won't tumble, replacing the cut off fuse may alleviate these issues. The thermal cut off is located behind the dryer's lower access panel and attaches to the exhaust duct. Several wire terminals are included for installation depending on the part number you are replacing. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Dryer Thermal Cut Off Fuse
• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Dryer Thermal Cut Off Fuse
• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Front Load Dryer Thermal Cut Off Fuse is a safety device designed to protect the dryer from overheating. If your dryer won't start, won't produce heat, shuts off too soon or won't tumble, replacing the cut off fuse may alleviate these issues. The thermal cut off is located behind the dryer's lower access panel and attaches to the exhaust duct. Several wire terminals are included for installation depending on the part number you are replacing. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Dryer Thermal Cut Off Fuse
• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Dryer Thermal Cut Off Fuse
• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver
Write Your Own Review
The following parts are replaced by this product
- 3390719
- ET402GL
- 279650
- 3389639
- 3389640
- 660877
- 688841
- 690198
- 690798
Replacing the Whirlpool WP 3390719 FUSE-THRML
Instructions:
1. Safety first: Always turn off the power to your appliance before attempting any repair. Unplug the power cord or flip the breaker in the fuse box.
2. Locate the fuse: To replace the FUSE-THRML, you will need to locate it first. Depending on your model, it may be located behind the control panel or inside the back panel of your appliance.
3. Remove the old fuse: Once you’ve found the fuse, use a flat-head screwdriver to unscrew the screws that hold it in place. Once the screws are removed, the cover should slide off and you can remove the old fuse.
4. Install the new fuse: Take the new FUSE-THRML and insert it into the same slot where the old fuse was located. Secure it with the screws you removed earlier.
5. Test it out: Now that the new fuse is installed, turn the power back on and test it out. If it functions properly, then you’re done!
Congratulations! You’ve just successfully replaced the Whirlpool WP3390719 FUSE-THRML.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions:
1. Safety first: Always turn off the power to your appliance before attempting any repair. Unplug the power cord or flip the breaker in the fuse box.
2. Locate the fuse: To replace the FUSE-THRML, you will need to locate it first. Depending on your model, it may be located behind the control panel or inside the back panel of your appliance.
3. Remove the old fuse: Once you’ve found the fuse, use a flat-head screwdriver to unscrew the screws that hold it in place. Once the screws are removed, the cover should slide off and you can remove the old fuse.
4. Install the new fuse: Take the new FUSE-THRML and insert it into the same slot where the old fuse was located. Secure it with the screws you removed earlier.
5. Test it out: Now that the new fuse is installed, turn the power back on and test it out. If it functions properly, then you’re done!
Congratulations! You’ve just successfully replaced the Whirlpool WP3390719 FUSE-THRML.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
