W10629033 Whirlpool Refrigerator Inverter Control Box
This Built-In Refrigerator Inverter Assembly is located near the compressor and manages the main functions of the refrigerator, including cooling. If your appliance’s compressor won’t start and you notice burn marks or discoloration on the existing part, it has likely malfunctioned and will need to be replaced. Note that you must access the rear of the appliance to complete this repair. This kit includes (1) inverter box, (1) wire harness extension, (1) short jumper extension, (1) ground wire and installation instructions. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: To disconnect the wire harness from the existing inverter, slip a small screwdriver between the connector and the compressor to gently pry it loose.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Built-In Refrigerator Inverter Assembly
• Tools Needed: Multi screwdriver, needle-nose pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Built-In Refrigerator Inverter Assembly
• Tools Needed: Multi screwdriver, needle-nose pliers
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Built-In Refrigerator Inverter Assembly is located near the compressor and manages the main functions of the refrigerator, including cooling. If your appliance’s compressor won’t start and you notice burn marks or discoloration on the existing part, it has likely malfunctioned and will need to be replaced. Note that you must access the rear of the appliance to complete this repair. This kit includes (1) inverter box, (1) wire harness extension, (1) short jumper extension, (1) ground wire and installation instructions. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: To disconnect the wire harness from the existing inverter, slip a small screwdriver between the connector and the compressor to gently pry it loose.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Built-In Refrigerator Inverter Assembly
• Tools Needed: Multi screwdriver, needle-nose pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Built-In Refrigerator Inverter Assembly
• Tools Needed: Multi screwdriver, needle-nose pliers
Write Your Own Review
The following parts are replaced by this product
- 2209324
- 2221559
- 2224047
- 2306957
- 2304098
- 8201670
- 2304175
- W10133449
How to Replace the W10629033 Whirlpool Refrigerator Inverter Control Box
Things You'll Need
- Screwdriver
- Replacement W10629033 Whirlpool Refrigerator Inverter Control Box
Steps
1. Unplug the refrigerator from the wall outlet.
2. Open the freezer door, and locate the inverter control box.
3. Remove the screws that are securing the inverter control box to the side of the refrigerator.
4. Carefully remove the inverter control box from the refrigerator.
5. Disconnect the wiring harness from the inverter control box.
6. Connect the wiring harness to the replacement inverter control box.
7. Secure the replacement inverter control box to the side of the refrigerator with the screws.
8. Plug the refrigerator back into the wall outlet, and test the refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
