Online Sale!
100% Guaranteed Genuine Parts
3051162 Frigidaire Oven Range Front Broiler Drawer Glide
3051162 Frigidaire Oven Range Front Broiler Drawer Glide
Weight : 0.021600 lbs
Dimension : 1.456600 x 1.456600 x 1.417300
About this product
3051162 Frigidaire Oven Range Front Broiler Drawer Glide
Weight : 0.021600 lbs
Dimension : 1.456600 x 1.456600 x 1.417300
The following parts are replaced by this product
- 08067766
- 3012698
- 3051361
- 3131687
Step 1: Unplug the range from the electrical outlet.
Step 2: Open the oven door and locate the front broiler drawer. Pull out the drawer and look underneath it. There should be two screws that hold the drawer glide in place.
Step 3: Unscrew the two screws holding the drawer glide to the bottom of the drawer. Set the screws aside.
Step 4: Carefully remove the glide from the drawer.
Step 5: Take the new 3051162 Frigidaire Range Front Broiler Drawer Glide and insert it into the drawer until it fits snugly.
Step 6: Replace the two screws that you removed in Step 2, ensuring they are properly secured.
Step 7: Plug in the range and turn on the power. The new drawer glide should be in place.
Step 8: Test the drawer glide for proper functioning. Pull the drawer in and out several times to make sure it is working properly.
Step 9: If everything is working properly, pat yourself on the back for a job well done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Open the oven door and locate the front broiler drawer. Pull out the drawer and look underneath it. There should be two screws that hold the drawer glide in place.
Step 3: Unscrew the two screws holding the drawer glide to the bottom of the drawer. Set the screws aside.
Step 4: Carefully remove the glide from the drawer.
Step 5: Take the new 3051162 Frigidaire Range Front Broiler Drawer Glide and insert it into the drawer until it fits snugly.
Step 6: Replace the two screws that you removed in Step 2, ensuring they are properly secured.
Step 7: Plug in the range and turn on the power. The new drawer glide should be in place.
Step 8: Test the drawer glide for proper functioning. Pull the drawer in and out several times to make sure it is working properly.
Step 9: If everything is working properly, pat yourself on the back for a job well done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review