Online Sale!
100% Guaranteed Genuine Parts
WP717273 Whirlpool Dishwasher Rubber Washer
The Dishwasher Rubber Washer sits in between the heating element and the dishwasher tub, and prevents leaks. If your dishwasher is leaking water, this part may need to be replaced. In order to access the part, you'll need to remove the screws that hold the dishwasher to the cabinet. You'll then disconnect the lines underneath the sink so you can pull the dishwasher out of the cabinet. Then disconnect the heater element behind the machine. Replacing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply to your dishwasher before you begin. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rubber Washer
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rubber Washer
• Tools Needed: Multi screwdriver
Weight : 0.064700 lbs
Dimension : 3.000000 x 0.250000 x 3.000000
Compatible Brands
About this product
The Dishwasher Rubber Washer sits in between the heating element and the dishwasher tub, and prevents leaks. If your dishwasher is leaking water, this part may need to be replaced. In order to access the part, you'll need to remove the screws that hold the dishwasher to the cabinet. You'll then disconnect the lines underneath the sink so you can pull the dishwasher out of the cabinet. Then disconnect the heater element behind the machine. Replacing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply to your dishwasher before you begin. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rubber Washer
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rubber Washer
• Tools Needed: Multi screwdriver
Weight : 0.064700 lbs
Dimension : 3.000000 x 0.250000 x 3.000000
The following parts are replaced by this product
- 717273
- 680862
No more associated models for this part.
1. Unplug the dishwasher from the wall outlet and turn off the circuit breaker that supplies power to the dishwasher.
2. Lift the top panel of the dishwasher, using a screwdriver if necessary - depending on your model; the screws may be located on the front or side of the dishwasher.
3. Carefully remove the clips that hold the rubber washer in place - these are usually located near the top of the washer in the corners.
4. Pull the old rubber washer out.
5. Clean the area where the washer was placed with a damp cloth.
6. Place the new rubber washer in the same place as the old one. Make sure that it is securely fitted and sealed.
7. Replace the clips. Make sure they are firmly attached.
8. Close the top panel and plug the machine in. Restore the power supply to the dishwasher.
9. Test the new washer to make sure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Lift the top panel of the dishwasher, using a screwdriver if necessary - depending on your model; the screws may be located on the front or side of the dishwasher.
3. Carefully remove the clips that hold the rubber washer in place - these are usually located near the top of the washer in the corners.
4. Pull the old rubber washer out.
5. Clean the area where the washer was placed with a damp cloth.
6. Place the new rubber washer in the same place as the old one. Make sure that it is securely fitted and sealed.
7. Replace the clips. Make sure they are firmly attached.
8. Close the top panel and plug the machine in. Restore the power supply to the dishwasher.
9. Test the new washer to make sure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review