218396700 Frigidaire Door Handle Mounting Block

DIY Instructions for Replacing the 218396700 Frigidaire Door Handle Mounting Block

Step 1: Unscrew handle to remove. Use a flat-head or Phillips head screwdriver to unscrew the handle.
Remove the screws. Be sure to store them in a safe place so they don't get lost.

Step 2: Remove old mounting block. Insert a flat-head screwdriver into the springs between the door and the mounting block, then lever the mounting block away from the door and pull it out.

Step 3: Install new mounting block. Slide the new mounting block up into the springs, making sure that it is lined up with the holes in the door.

Step 4: Secure the mounting block. Use the same screws you used to remove the old mounting block to secure the new one in place.

Step 5: Re-install handle. Place the handle onto the door, lining up the slots in the handle with the screws on the mounting block. Then, use a flat-head or Phillips head screwdriver to screw the handle back into place.

You’re all done! Congratulations on successfully replacing the 218396700 Frigidaire Door Handle Mounting Block.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.