WP2220457 Whirlpool Refrigerator Ice Bin Coupling
Ice bin coupling works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Ice bin coupling works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Write Your Own Review
The following parts are replaced by this product
- 2198604
- 2220457
DIY Refrigerator Ice Bin Coupling Replacement – Step by Step
1. Unplug the refrigerator from the power source and remove all food from the fridge.
2. Open the refrigerator door and locate the ice bin coupling assembly. You’ll find it in the back left side of the refrigerator, behind the ice compartment.
3. Grab a flashlight and look behind the ice bin coupling assembly for any debris or obstructions blocking the new coupling from being installed.
4. Once you have verified there is no debris, you can begin to remove the old coupling. Loosen the screws that secure the coupling in place and gently pull it away from the wall.
5. Take the new WP2220457 Whirlpool Refrigerator Ice Bin Coupling and insert it into place. Make sure the tabs align perfectly so it fits securely.
6. Re-tighten the screws and make sure the coupling is held in place securely.
7. Put the food back in the refrigerator and plug it in.
8. Test the ice bin coupling to make sure it is working properly. If everything is working correctly, you’ve successfully replaced your WP2220457 Whirlpool Refrigerator Ice Bin Coupling!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator from the power source and remove all food from the fridge.
2. Open the refrigerator door and locate the ice bin coupling assembly. You’ll find it in the back left side of the refrigerator, behind the ice compartment.
3. Grab a flashlight and look behind the ice bin coupling assembly for any debris or obstructions blocking the new coupling from being installed.
4. Once you have verified there is no debris, you can begin to remove the old coupling. Loosen the screws that secure the coupling in place and gently pull it away from the wall.
5. Take the new WP2220457 Whirlpool Refrigerator Ice Bin Coupling and insert it into place. Make sure the tabs align perfectly so it fits securely.
6. Re-tighten the screws and make sure the coupling is held in place securely.
7. Put the food back in the refrigerator and plug it in.
8. Test the ice bin coupling to make sure it is working properly. If everything is working correctly, you’ve successfully replaced your WP2220457 Whirlpool Refrigerator Ice Bin Coupling!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
