WP12227305WD Whirlpool Drawer Support
Part #: WPL WP12227305WD
Whirlpool WP12227305WD SUPPORT We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP12227305WD SUPPORT We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- 67002330
- 12227305WD
DIY Replacement of the Whirlpool WP12227305WD Support
1. Unplug your refrigerator from the power source before beginning any repairs.
2. Carefully remove the shelves and drawers from the interior of your fridge.
3. Locate the support, located near the back wall. If you need help, refer to your user manual.
4. Using a wrench or socket set, carefully loosen the mounting screws that secure the existing support in place.
5. Gently remove the existing support from its mounting location.
6. Clean the old mounting surface with a cloth or paper towel.
7. Position the new support in the same location as the old one.
8. Secure the new support in place using the same mounting screws.
9. Carefully replace all of the shelves and drawers back into the refrigerator.
10. Plug the power cord back into the power source, and turn the fridge back on.
Congratulations, you have successfully changed the support on your Whirlpool WP12227305WD refrigerator!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your refrigerator from the power source before beginning any repairs.
2. Carefully remove the shelves and drawers from the interior of your fridge.
3. Locate the support, located near the back wall. If you need help, refer to your user manual.
4. Using a wrench or socket set, carefully loosen the mounting screws that secure the existing support in place.
5. Gently remove the existing support from its mounting location.
6. Clean the old mounting surface with a cloth or paper towel.
7. Position the new support in the same location as the old one.
8. Secure the new support in place using the same mounting screws.
9. Carefully replace all of the shelves and drawers back into the refrigerator.
10. Plug the power cord back into the power source, and turn the fridge back on.
Congratulations, you have successfully changed the support on your Whirlpool WP12227305WD refrigerator!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.