WPW10189190 Whirlpool Start Device
The SxS Refrigerator Start Device Assembly is mounted to the side of the compressor on the back of the refrigerator and causes the compressor to start when refrigeration is needed. This device assembly includes the relay and overload. Installing this part will require basic hand tools, some disassembly of the refrigerator and prior repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Start Device Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Start Device Assembly
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The SxS Refrigerator Start Device Assembly is mounted to the side of the compressor on the back of the refrigerator and causes the compressor to start when refrigeration is needed. This device assembly includes the relay and overload. Installing this part will require basic hand tools, some disassembly of the refrigerator and prior repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Start Device Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Start Device Assembly
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- 18516-3
- 4357156
- 2255554
- 2319793
- W10189190
- W10197427
- 68001622
- 10097201
- 4343850
- Y0303053
- 14203585
- 14200214
- Y0313053
- 4344041
- 68001457
1. Start by unplugging your Whirlpool WPW10189190 START-DEV from the power source and disconnecting all wires attached to it.
2. Use a screwdriver to carefully remove the screws attaching the START-DEV to the wall or cabinet and then carefully pull it out.
3. Place your new Whirlpool WPW10189190 START-DEV onto the wall or cabinet, aligning it in the same position as the old one.
4. Securely put the screws back into the wall or cabinet, making sure they are all tightened.
5. Now connect the electrical wires to each side of the START-DEV, ensuring proper connections.
6. Plug the Whirlpool WPW10189190 START-DEV into the power socket and switch on at the power point/ switchboard.
7. Finally, test the START-DEV to make sure it has been properly installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Use a screwdriver to carefully remove the screws attaching the START-DEV to the wall or cabinet and then carefully pull it out.
3. Place your new Whirlpool WPW10189190 START-DEV onto the wall or cabinet, aligning it in the same position as the old one.
4. Securely put the screws back into the wall or cabinet, making sure they are all tightened.
5. Now connect the electrical wires to each side of the START-DEV, ensuring proper connections.
6. Plug the Whirlpool WPW10189190 START-DEV into the power socket and switch on at the power point/ switchboard.
7. Finally, test the START-DEV to make sure it has been properly installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
