
WP707929 Whirlpool Grease Filter
Part #: WPL WP707929
Maytag Jenn-Air Range Hood Grease Filter 707929
Size: 11 3/8" X 14" X 3/32"
This Filters fits Jenn Air down draft ranges.
Same as Part#RHF1109
We are a Factory Authorized Parts Distributor for Whirlpool Maytag Jenn-Air. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Size: 11 3/8" X 14" X 3/32"
This Filters fits Jenn Air down draft ranges.
Same as Part#RHF1109
We are a Factory Authorized Parts Distributor for Whirlpool Maytag Jenn-Air. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Maytag Jenn-Air Range Hood Grease Filter 707929
Size: 11 3/8" X 14" X 3/32"
This Filters fits Jenn Air down draft ranges.
Same as Part#RHF1109
We are a Factory Authorized Parts Distributor for Whirlpool Maytag Jenn-Air. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Size: 11 3/8" X 14" X 3/32"
This Filters fits Jenn Air down draft ranges.
Same as Part#RHF1109
We are a Factory Authorized Parts Distributor for Whirlpool Maytag Jenn-Air. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Write Your Own Review
Replacing the WP707929 Whirlpool Grease Filter
1. Before proceeding, turn off the power to your range hood at the circuit breaker.
2. Pull out the filter tray or basket and shake off any debris or grease.
3. Remove the existing filter by grasping it at each end and pulling carefully away from the hood.
4. Slide the new WP707929 Whirlpool Grease Filter into the same space previously occupied by the old one. Make sure it is pushed in all the way to ensure a tight fit.
5. Turn on the power to the hood at the circuit breaker.
6. Replace the filter tray or basket and check the filter for any blemishes.
7. Test the hood to make sure the new filter is working properly.
Following these steps will help you replace the WP707929 Whirlpool Grease Filter quickly and easily.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Before proceeding, turn off the power to your range hood at the circuit breaker.
2. Pull out the filter tray or basket and shake off any debris or grease.
3. Remove the existing filter by grasping it at each end and pulling carefully away from the hood.
4. Slide the new WP707929 Whirlpool Grease Filter into the same space previously occupied by the old one. Make sure it is pushed in all the way to ensure a tight fit.
5. Turn on the power to the hood at the circuit breaker.
6. Replace the filter tray or basket and check the filter for any blemishes.
7. Test the hood to make sure the new filter is working properly.
Following these steps will help you replace the WP707929 Whirlpool Grease Filter quickly and easily.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.


