LA-1006 Whirlpool Dryer Right Hand Glide Kit
The Dryer Drum Glide supports the right side of the drum as it spins during the drying cycle. If you’re hearing a scraping or grinding sound coming from the side of your appliance during operation, replacing this part may alleviate the issue. Note that you must replace both glides at the same time. This kit includes (1) glide and (1) felt pad with adhesive backing. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Also consider replacing the Tumble Glide Pad (item WP31001356).
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Glide
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Glide
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dryer Drum Glide supports the right side of the drum as it spins during the drying cycle. If you’re hearing a scraping or grinding sound coming from the side of your appliance during operation, replacing this part may alleviate the issue. Note that you must replace both glides at the same time. This kit includes (1) glide and (1) felt pad with adhesive backing. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Also consider replacing the Tumble Glide Pad (item WP31001356).
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Glide
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Drum Glide
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- LA1006
- 53-0310N
- ERLA1006
Replace the LA-1006 Whirlpool Dryer Right Hand Glide Kit
Tools Needed:
- Phillips head screwdriver
- Needle nose pliers
- Flathead screwdriver (optional)
Instructions:
1. Disconnect the power to the dryer, either by unplugging it from the wall or by turning off the breaker in your home’s electrical panel.
2. Open the dryer door and locate the right hand glide kit. It is located on the inside of the dryer drum assembly on the left-hand side.
3. Unscrew the screws or nuts that are holding the right hand glide kit in place. Use a Phillips head screwdriver for this step.
4. Gently pull out the right hand glide kit.
5. Inspect the new glide kit for any signs of damage.
6. Align the new glide kit into the opening of the drum assembly. Ensure that the glide kit is securely in place.
7. Reinstall the screws or nuts that were removed earlier. Secure the new kit with a Phillips head screwdriver.
8. Reconnect the power to the dryer.
9. Test the dryer to ensure that the new glide kit is working properly.
Congratulations! You have successfully replaced the LA-1006 Whirlpool Dryer Right Hand Glide Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
- Phillips head screwdriver
- Needle nose pliers
- Flathead screwdriver (optional)
Instructions:
1. Disconnect the power to the dryer, either by unplugging it from the wall or by turning off the breaker in your home’s electrical panel.
2. Open the dryer door and locate the right hand glide kit. It is located on the inside of the dryer drum assembly on the left-hand side.
3. Unscrew the screws or nuts that are holding the right hand glide kit in place. Use a Phillips head screwdriver for this step.
4. Gently pull out the right hand glide kit.
5. Inspect the new glide kit for any signs of damage.
6. Align the new glide kit into the opening of the drum assembly. Ensure that the glide kit is securely in place.
7. Reinstall the screws or nuts that were removed earlier. Secure the new kit with a Phillips head screwdriver.
8. Reconnect the power to the dryer.
9. Test the dryer to ensure that the new glide kit is working properly.
Congratulations! You have successfully replaced the LA-1006 Whirlpool Dryer Right Hand Glide Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
