Online Sale!
100% Guaranteed Genuine Parts
WPW10349488 Whirlpool Screw
Whirlpool WPW10349488 SCREW. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.007200 lbs
Dimension : 0.750000 x 0.250000 x 0.250000
Compatible Brands
About this product
Whirlpool WPW10349488 SCREW. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.007200 lbs
Dimension : 0.750000 x 0.250000 x 0.250000
The following parts are replaced by this product
- 3400002
- 3400031
- 8533889
- W10349488
No more associated models for this part.
DIY Instructions for Replacing the Whirlpool WPW10349488 Screw
1. Unplug the appliance from the power source and turn off the water supply.
2. Remove the screws or clamps that are holding the back panel in place.
3. Locate the screw that needs to be replaced. It is usually found around the edges of the construction.
4. Use a flat-head screwdriver or other tool to loosen the screw and remove it from its hole.
5. Replace the old screw with the new one.
6. Make sure to tighten the screw securely into the hole.
7. Replace the screws or clamps that were removed from the back panel.
8. Re-connect the appliance to the power source and turn the water supply back on.
9. Test the appliance to ensure that it works correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the appliance from the power source and turn off the water supply.
2. Remove the screws or clamps that are holding the back panel in place.
3. Locate the screw that needs to be replaced. It is usually found around the edges of the construction.
4. Use a flat-head screwdriver or other tool to loosen the screw and remove it from its hole.
5. Replace the old screw with the new one.
6. Make sure to tighten the screw securely into the hole.
7. Replace the screws or clamps that were removed from the back panel.
8. Re-connect the appliance to the power source and turn the water supply back on.
9. Test the appliance to ensure that it works correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review