Online Sale!
100% Guaranteed Genuine Parts
W10830189 Whirlpool Refrigerator Door Gasket
The French Door Refrigerator Door Gasket is a new white rubber door seal measuring 23-1/4" H x 19-3/4" W. If one of the appliance doors won't close properly or you can feel cold air escaping the appliance, replacing the rubber gasket may alleviate these issues. Note that door seal gaskets may also compress over time, causing the appliance to work harder to maintain a constant, cool temperature. To remove any creases or wrinkles from the new gasket, set it in the sun or place it in hot water for a few minutes. Installing this part will require basic hand tools, removal of the refrigerator door and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Door Gasket
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Door Gasket
• Tools Needed: Multi screwdriver
Weight : 8.738600 lbs
Dimension : 23.779500 x 19.960600 x 2.559000
Compatible Brands
About this product
The French Door Refrigerator Door Gasket is a new white rubber door seal measuring 23-1/4" H x 19-3/4" W. If one of the appliance doors won't close properly or you can feel cold air escaping the appliance, replacing the rubber gasket may alleviate these issues. Note that door seal gaskets may also compress over time, causing the appliance to work harder to maintain a constant, cool temperature. To remove any creases or wrinkles from the new gasket, set it in the sun or place it in hot water for a few minutes. Installing this part will require basic hand tools, removal of the refrigerator door and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Door Gasket
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Door Gasket
• Tools Needed: Multi screwdriver
Weight : 8.738600 lbs
Dimension : 23.779500 x 19.960600 x 2.559000
The following parts are replaced by this product
- 67003546
- 8208244
- W10137006
- W10163894
- W10443221
- W10571959
Replacing the Whirlpool Refrigerator Door Gasket-FIP (W10830189)
Step 1: Preparing to Replace the Gasket-FIP
Before beginning the project, make sure you have all the necessary tools and parts available. You’ll need a Phillips screwdriver, a flathead screwdriver, a putty knife, and the new W10830189 Whirlpool Refrigerator Door Gasket-FIP.
Step 2: Removing the Old Gasket-FIP
First, unplug the refrigerator from the power outlet. Then, use your putty knife to carefully pry off the old gasket-FIP along the edges. Work carefully and slowly to avoid damaging the refrigerator frame or door. Then, remove any remaining adhesive or remnants of the old gasket-FIP.
Step 3: Installing the New Gasket-FIP
To install the new gasket-FIP, begin by carefully opening the package and removing the item. Place it on the refrigerator door and line up the holes in the gasket-FIP with those in the door. If the gasket-FIP does not fit perfectly, you may need to adjust it slightly.
Once you have the gasket-FIP located correctly, press firmly on the gasket-FIP to secure it into place. Finally, use a flathead screwdriver to lock the screws in the corners of the gasket-FIP.
Step 4: Checking for Leaks
After installing the new gasket-FIP, check around the edges to make sure there are no gaps or leaks. Pay special attention to the four screws in the corners. If you detect any leaks, you may need to tighten the screws or readjust the gasket-FIP.
Step 5: Finishing the Installation
Once you’ve checked the gasket-FIP and made any necessary adjustments, you’re ready to plug the refrigerator back in and turn it on. You can then start to enjoy the improved efficiency and performance of your newly replaced Whirlpool Refrigerator Door Gasket-FIP (W10830189).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1: Preparing to Replace the Gasket-FIP
Before beginning the project, make sure you have all the necessary tools and parts available. You’ll need a Phillips screwdriver, a flathead screwdriver, a putty knife, and the new W10830189 Whirlpool Refrigerator Door Gasket-FIP.
Step 2: Removing the Old Gasket-FIP
First, unplug the refrigerator from the power outlet. Then, use your putty knife to carefully pry off the old gasket-FIP along the edges. Work carefully and slowly to avoid damaging the refrigerator frame or door. Then, remove any remaining adhesive or remnants of the old gasket-FIP.
Step 3: Installing the New Gasket-FIP
To install the new gasket-FIP, begin by carefully opening the package and removing the item. Place it on the refrigerator door and line up the holes in the gasket-FIP with those in the door. If the gasket-FIP does not fit perfectly, you may need to adjust it slightly.
Once you have the gasket-FIP located correctly, press firmly on the gasket-FIP to secure it into place. Finally, use a flathead screwdriver to lock the screws in the corners of the gasket-FIP.
Step 4: Checking for Leaks
After installing the new gasket-FIP, check around the edges to make sure there are no gaps or leaks. Pay special attention to the four screws in the corners. If you detect any leaks, you may need to tighten the screws or readjust the gasket-FIP.
Step 5: Finishing the Installation
Once you’ve checked the gasket-FIP and made any necessary adjustments, you’re ready to plug the refrigerator back in and turn it on. You can then start to enjoy the improved efficiency and performance of your newly replaced Whirlpool Refrigerator Door Gasket-FIP (W10830189).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review