12112425 Whirlpool Washer Pump and Drive Belt Set

100% Guaranteed genuine parts logo
The Top Load Washer Pump Belt is located between the motor pulley and and the pump pulley, and drives the pump in your washer. If your washer does not spin or drain water properly, replacing this part may alleviate these issues. You'll need to remove the front panel of your washing machine to access the old belt using a phillips screwdriver. When tipping the washer back to access the belt, be sure to support the appliance with a piece of wood so it remains steady. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Pump Belt
• Tools Needed: Multi screwdriver

Weight : 3.5971 lbs
Dimension : 9.75 x 5.25 x 9.5
$44.92
In stock
In stock
Out of stock
Enter a valid ZIP code Ok Edit
The Top Load Washer Pump Belt is located between the motor pulley and and the pump pulley, and drives the pump in your washer. If your washer does not spin or drain water properly, replacing this part may alleviate these issues. You'll need to remove the front panel of your washing machine to access the old belt using a phillips screwdriver. When tipping the washer back to access the belt, be sure to support the appliance with a piece of wood so it remains steady. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Pump Belt
• Tools Needed: Multi screwdriver

Weight : 3.5971 lbs
Dimension : 9.75 x 5.25 x 9.5
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. 12112425
  2. 211124
  3. 211125
  4. LB125
  5. LB126
  6. 2-11124
  7. 2-11125
  8. 210024
  9. WP211125
  10. 211124
Step-by-Step DIY Instructions on How to Replace the Whirlpool Washer Pump and Drive Belt Set (Model 12112425)

1. Unplug your washer from the wall outlet and shut off the water supply to the washer.

2. Remove the front panel of your washer by removing the screws on the top and bottom.

3. Pull out the washer tub and move it aside to give you access to the underside of the machine.

4. Loosen and remove the screws that are securing the washer pump to the motor and Rubber coupling.

5. Pull out the old pump and disconnect the water hoses from the washer pump.

6. Connect the new Whirlpool washer pump and drive belt set (Model 12112425) to the motor and rubber coupling.

7. Insert the washer tub back into place and secure it with the screws.

8. Plug in the washer and turn on the water supply.

9. Test the new washer pump and drive belt set by running a cycle and verify the washer is working correctly.

10. Close the front panel of the washer and replace the screws.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with admiral Compatible with amana Compatible with jenn-air Compatible with kenmore Compatible with kitchenaid Compatible with magic_chef Compatible with maytag Compatible with norge Compatible with roper Compatible with whirlpool