D511637P Speed Queen Washer Dryer Adhesive Dow 737 Clr 3 Oz Tube
The D511637P Speed Queen Washer/Dryer Adhesive is the perfect solution for all of your appliance installation needs. This high-performance product provides a strong, long-lasting bond between metal surfaces and is specifically formulated for washers and dryers. The Dow 737 CLR adhesive is easy to apply with its 3 OZ tube, and its fast-drying capabilities provide an air-tight seal that will guarantee a secure attachment. This adhesive will not break down or weaken from exposure to water, making it the perfect choice for any appliance installation.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The D511637P Speed Queen Washer/Dryer Adhesive is the perfect solution for all of your appliance installation needs. This high-performance product provides a strong, long-lasting bond between metal surfaces and is specifically formulated for washers and dryers. The Dow 737 CLR adhesive is easy to apply with its 3 OZ tube, and its fast-drying capabilities provide an air-tight seal that will guarantee a secure attachment. This adhesive will not break down or weaken from exposure to water, making it the perfect choice for any appliance installation.
Write Your Own Review
The following parts are replaced by this product
- 511637
- 511637P
DIY Steps for Replacing the D511637P Speed Queen Washer/Dryer Adhesive
1. Start by turning off the power to your washer/dryer combo unit. This can be done by unplugging the appliance from the wall. For safety reasons, it is important that you verify that the power is off by testing the unit.
2. Open up the unit and locate the D511637P Speed Queen Washer/Dryer adhesive. To do this, you will need to unscrew the screws or bolts that hold the outer panels in place.
3. Using a flat head screwdriver, carefully pry off the perimeter of the panel to release the adhesive from the washer/dryer. Discard the old adhesive.
4. Clean the surface of the washer/dryer where the adhesive was previously located. This can be done with a damp cloth.
5. Apply the new adhesive such as Dow 737 Clr 3 OZ Tube. It is important to apply the adhesive around the perimeter of the washer/dryer. Make sure to spread the adhesive evenly along the edges.
6. Replace the panels on the washer/dryer, making sure that the adhesive is secure. Use the screws or bolts to secure the panels in place.
7. Restore power to the washer/dryer. Test the unit to ensure that it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Start by turning off the power to your washer/dryer combo unit. This can be done by unplugging the appliance from the wall. For safety reasons, it is important that you verify that the power is off by testing the unit.
2. Open up the unit and locate the D511637P Speed Queen Washer/Dryer adhesive. To do this, you will need to unscrew the screws or bolts that hold the outer panels in place.
3. Using a flat head screwdriver, carefully pry off the perimeter of the panel to release the adhesive from the washer/dryer. Discard the old adhesive.
4. Clean the surface of the washer/dryer where the adhesive was previously located. This can be done with a damp cloth.
5. Apply the new adhesive such as Dow 737 Clr 3 OZ Tube. It is important to apply the adhesive around the perimeter of the washer/dryer. Make sure to spread the adhesive evenly along the edges.
6. Replace the panels on the washer/dryer, making sure that the adhesive is secure. Use the screws or bolts to secure the panels in place.
7. Restore power to the washer/dryer. Test the unit to ensure that it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
