Online Sale!
100% Guaranteed Genuine Parts
WPW10190961 Whirlpool Ice Maker
The Refrigerator Ice Maker Assembly is a replacement for your refrigerator's ice maker. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage is full. If your ice maker isn't working as expected, replacing this part may alleviate the issue. Note that you will need to re-use the auger arm, cover and bracket from your existing ice maker to properly install the new assembly. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: If your old water line has a kink or starts to leak, it should be replaced. A water filter can also be added inline with the copper supply line to improve the quality of your ice.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Weight : 4.935300 lbs
Dimension : 14.440000 x 7.440000 x 7.380000
Compatible Brands
About this product
The Refrigerator Ice Maker Assembly is a replacement for your refrigerator's ice maker. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage is full. If your ice maker isn't working as expected, replacing this part may alleviate the issue. Note that you will need to re-use the auger arm, cover and bracket from your existing ice maker to properly install the new assembly. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: If your old water line has a kink or starts to leak, it should be replaced. A water filter can also be added inline with the copper supply line to improve the quality of your ice.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Weight : 4.935300 lbs
Dimension : 14.440000 x 7.440000 x 7.380000
The following parts are replaced by this product
- 2212353
- 2212352
- W10122503
- W10190961
No more associated models for this part.
How to Replace the Whirlpool WPW10190961 Icemaker
Replacing a faulty icemaker is an important task to keep your Whirlpool appliance working properly. The Whirlpool WPW10190961 icemaker is one such appliance component that needs replacement from time to time. With the right tools and instructions, you can easily replace it yourself with minimal hassle. Here’s how to do it:
1. Unplug the refrigerator from its power source. This is important for safety reasons, so make sure to disconnect the power before working on the icemaker.
2. Remove the icemaker from the refrigerator. This can be done by taking out the screws holding it in place and then gently pulling it away.
3. Install the new icemaker. Place the new icemaker into place and then use the screws to secure it in place.
4. Connect the power source. Reconnect the power source to the refrigerator and then turn on the power to ensure that the icemaker is functioning correctly.
5. Test the ice production. Fill the tray with cold water and then wait for the icemaker to start making ice. Once it does, check for any leaks and adjust the thermostat as necessary.
Replacing the Whirlpool WPW10190961 icemaker can be done quickly and easily with the right tools and instructions. Make sure to unplug the refrigerator before beginning, and be sure to test the ice production afterwards to ensure that your new icemaker is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a faulty icemaker is an important task to keep your Whirlpool appliance working properly. The Whirlpool WPW10190961 icemaker is one such appliance component that needs replacement from time to time. With the right tools and instructions, you can easily replace it yourself with minimal hassle. Here’s how to do it:
1. Unplug the refrigerator from its power source. This is important for safety reasons, so make sure to disconnect the power before working on the icemaker.
2. Remove the icemaker from the refrigerator. This can be done by taking out the screws holding it in place and then gently pulling it away.
3. Install the new icemaker. Place the new icemaker into place and then use the screws to secure it in place.
4. Connect the power source. Reconnect the power source to the refrigerator and then turn on the power to ensure that the icemaker is functioning correctly.
5. Test the ice production. Fill the tray with cold water and then wait for the icemaker to start making ice. Once it does, check for any leaks and adjust the thermostat as necessary.
Replacing the Whirlpool WPW10190961 icemaker can be done quickly and easily with the right tools and instructions. Make sure to unplug the refrigerator before beginning, and be sure to test the ice production afterwards to ensure that your new icemaker is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review