67006325 Whirlpool Bracket Filter Base
The Whirlpool 67006325 BRACKET- Filter Base. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The Whirlpool 67006325 BRACKET- Filter Base. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Replacing the Whirlpool 67006325 BRACKET- FAN MOUNT
Instructions
1. Unplug the power cord of your appliance and turn the power off at the circuit breaker.
2. Locate the fan mount bracket by starting from the rear end, moving down along both sides of the interior of the appliance and then near the bottom in the center.
3. Remove all screws that are holding the bracket in place using a Phillips screwdriver.
4. Lift the bracket off the unit and set aside.
5. Place the new Whirlpool 67006325 BRACKET- FAN MOUNT - carefully align the screw holes and any protrusions with those of the mounting bracket.
6. Secure the bracket in place with screws and tighten them securely.
7. Plug the power cord back into the appliance and turn the power on at the circuit breaker.
8. Test the appliance to make sure the new fan mount bracket is properly installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions
1. Unplug the power cord of your appliance and turn the power off at the circuit breaker.
2. Locate the fan mount bracket by starting from the rear end, moving down along both sides of the interior of the appliance and then near the bottom in the center.
3. Remove all screws that are holding the bracket in place using a Phillips screwdriver.
4. Lift the bracket off the unit and set aside.
5. Place the new Whirlpool 67006325 BRACKET- FAN MOUNT - carefully align the screw holes and any protrusions with those of the mounting bracket.
6. Secure the bracket in place with screws and tighten them securely.
7. Plug the power cord back into the appliance and turn the power on at the circuit breaker.
8. Test the appliance to make sure the new fan mount bracket is properly installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
