Online Sale!
100% Guaranteed Genuine Parts
W10371566 Whirlpool Outer Tub
W10371566 Whirlpool Outer Tub
Weight : 114.386900 lbs
Dimension : 24.380000 x 24.380000 x 26.750000
Compatible Brands
About this product
W10371566 Whirlpool Outer Tub
Weight : 114.386900 lbs
Dimension : 24.380000 x 24.380000 x 26.750000
No more associated models for this part.
Step 1: Gather Supplies
Before attempting to replace the Whirlpool W10371566 TUB-OUTER (DROP SHIP), it is important to gather all necessary supplies first. This includes a drop cloth, new tub-outer part, a screwdriver, and a pair of pliers.
Step 2: Prepare Tub
Next, lay the drop cloth down and place the tub on top of it. Using the screwdriver and pliers, remove any screws that are connected to the old tub.
Step 3: Install New Tub-Outer
Once the old tub-outer has been removed, the new one can be installed. Place the new part in the same position as the old one and use screws to attach it. Be sure not to over-tighten the screws as this may cause damage to the part.
Step 4: Test and Clean
Once the new part has been installed, it is important to check for any leaks. Fill up the tub with water and inspect for any leaks. If there are no leaks, the job is complete! Remove the drop cloth and give the tub a good cleaning.
By following these steps, you should have no problem replacing the Whirlpool W10371566 TUB-OUTER (DROP SHIP) part. With a little patience and attention to detail, your job should be successful!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Before attempting to replace the Whirlpool W10371566 TUB-OUTER (DROP SHIP), it is important to gather all necessary supplies first. This includes a drop cloth, new tub-outer part, a screwdriver, and a pair of pliers.
Step 2: Prepare Tub
Next, lay the drop cloth down and place the tub on top of it. Using the screwdriver and pliers, remove any screws that are connected to the old tub.
Step 3: Install New Tub-Outer
Once the old tub-outer has been removed, the new one can be installed. Place the new part in the same position as the old one and use screws to attach it. Be sure not to over-tighten the screws as this may cause damage to the part.
Step 4: Test and Clean
Once the new part has been installed, it is important to check for any leaks. Fill up the tub with water and inspect for any leaks. If there are no leaks, the job is complete! Remove the drop cloth and give the tub a good cleaning.
By following these steps, you should have no problem replacing the Whirlpool W10371566 TUB-OUTER (DROP SHIP) part. With a little patience and attention to detail, your job should be successful!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review