
3949247V Whirlpool Washer Lid Switch Assembly
Part #: WPL 3949247V
Lid switch assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of washing machines.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Lid switch assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of washing machines.
Write Your Own Review
The following parts are replaced by this product
- 3949237
- 3949239
- 3949240
- 3949247
DIY Guide to Replacing the 3949247V Whirlpool Washer Lid Switch Assembly
Replacing the lid switch assembly on your Whirlpool washer is a useful DIY project that will help keep your appliance working properly. Having a properly functioning lid switch is important, as it prevents the machine from agitating and spinning when the lid is open. Follow these step-by-step instructions to easily replace the 3949247V Whirlpool Washer Lid Switch Assembly.
Materials Needed:
• 3949247V Whirlpool Washer Lid Switch Assembly
• Phillips head screwdriver
• Flat head screwdriver
Instructions:
1. Unplug your washer from the wall outlet and turn off the water supply.
2. Remove the screws holding the access panel in place at the back of the machine.
3. Carefully remove the access panel and set aside.
4. Locate the lid switch assembly near the top, center of the washer’s interior.
5. Use your screwdrivers to unscrew the three screws that hold the lid switch assembly in place.
6. Disconnect the wire harness from the lid switch.
7. Carefully remove the lid switch from the machine.
8. Install the new 3949247V Whirlpool Washer Lid Switch Assembly into the machine in the exact same manner the old switch was removed.
9. Connect the wire harness to the new switch.
10. Reattach the screws to secure the switch in place.
11. Replace the access panel and reattach the screws that held it in place.
12. Turn on the water supply and plug in the washer.
Your Whirlpool washer is now ready to use with a properly functioning 3949247V Whirlpool Washer Lid Switch Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the lid switch assembly on your Whirlpool washer is a useful DIY project that will help keep your appliance working properly. Having a properly functioning lid switch is important, as it prevents the machine from agitating and spinning when the lid is open. Follow these step-by-step instructions to easily replace the 3949247V Whirlpool Washer Lid Switch Assembly.
Materials Needed:
• 3949247V Whirlpool Washer Lid Switch Assembly
• Phillips head screwdriver
• Flat head screwdriver
Instructions:
1. Unplug your washer from the wall outlet and turn off the water supply.
2. Remove the screws holding the access panel in place at the back of the machine.
3. Carefully remove the access panel and set aside.
4. Locate the lid switch assembly near the top, center of the washer’s interior.
5. Use your screwdrivers to unscrew the three screws that hold the lid switch assembly in place.
6. Disconnect the wire harness from the lid switch.
7. Carefully remove the lid switch from the machine.
8. Install the new 3949247V Whirlpool Washer Lid Switch Assembly into the machine in the exact same manner the old switch was removed.
9. Connect the wire harness to the new switch.
10. Reattach the screws to secure the switch in place.
11. Replace the access panel and reattach the screws that held it in place.
12. Turn on the water supply and plug in the washer.
Your Whirlpool washer is now ready to use with a properly functioning 3949247V Whirlpool Washer Lid Switch Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.

