100% Guaranteed Genuine Parts
RB170002 Speed Queen Dryer Drum Support Roller Kit
Drum support roller kit works with some Speed Queen, and Amana models of clothes dryers.
Weight : 0.404100 lbs
Dimension : 9.448800 x 5.393700 x 1.102300
Compatible Brands


About this product
Drum support roller kit works with some Speed Queen, and Amana models of clothes dryers.
Weight : 0.404100 lbs
Dimension : 9.448800 x 5.393700 x 1.102300
Step 1: Unplug the Speed Queen Dryer from its power source and move it to an area that allows you to easily access the back panel.
Step 2: Use a Phillips-head screwdriver to remove the screws securing the back panel to the dryer’s frame. Once the screws are removed, pull the panel off of the dryer.
Step 3: Locate the old drum support roller kit, which is usually located at the bottom of the dryer’s drum.
Step 4: Disconnect the power connections for the motor and the drum support roller.
Step 5: Using a socket wrench, remove the bolts securing the support roller to the frame of the dryer.
Step 6: Remove the old drum support roller kit and install the new one. Make sure the kit is installed properly, with the axle in the middle of the roller.
Step 7: Secure the new drum support roller kit in place by tightening the bolts with a socket wrench.
Step 8: Replace the power connections to the motor and the drum support roller.
Step 9: Replace the back panel on the dryer and secure it with the screws you removed earlier.
Step 10: Plug the Speed Queen Dryer back into its power source and test it out.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Use a Phillips-head screwdriver to remove the screws securing the back panel to the dryer’s frame. Once the screws are removed, pull the panel off of the dryer.
Step 3: Locate the old drum support roller kit, which is usually located at the bottom of the dryer’s drum.
Step 4: Disconnect the power connections for the motor and the drum support roller.
Step 5: Using a socket wrench, remove the bolts securing the support roller to the frame of the dryer.
Step 6: Remove the old drum support roller kit and install the new one. Make sure the kit is installed properly, with the axle in the middle of the roller.
Step 7: Secure the new drum support roller kit in place by tightening the bolts with a socket wrench.
Step 8: Replace the power connections to the motor and the drum support roller.
Step 9: Replace the back panel on the dryer and secure it with the screws you removed earlier.
Step 10: Plug the Speed Queen Dryer back into its power source and test it out.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review