WP8053334 Whirlpool Drawer Glide
This Electric Range Front Drawer Glide supports the storage or boiler drawer of your appliance and allows the drawer to easily be opened and closed. The range drawer requires (2) glides; this black plastic replacement part is sold separately and can be used for either the left or right side. Note that the mounting screw is not included, but is available for purchase under item WP3400832. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Electric Range Front Drawer Glide supports the storage or boiler drawer of your appliance and allows the drawer to easily be opened and closed. The range drawer requires (2) glides; this black plastic replacement part is sold separately and can be used for either the left or right side. Note that the mounting screw is not included, but is available for purchase under item WP3400832. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Write Your Own Review
The following parts are replaced by this product
- 8053334WP
- 3195062
- 8053334
DIY: How to Replace a WP8053334 Whirlpool Drawer Glide
Are you having an issue with your WP8053334 Whirlpool Drawer Glide? Need to replace it but don’t know how? Don’t worry! This easy DIY guide will walk you through the process of replacing your Whirlpool Drawer Glide from start to finish.
Before You Start:
Before beginning, gather the necessary tools and materials that you will need. You will need the following:
- A Phillips head screwdriver
- An adjustable wrench
- The replacement WP8053334 Whirlpool Drawer Glide
Step 1: Disconnect Power
Turn off the power to the appliance at the main circuit breaker before starting any repairs. This will ensure your safety throughout the entire process.
Step 2: Remove Drawer
Remove any items stored in the drawer, then pull the drawer out of its frame as far as possible. Put aside in a safe place.
Step 3: Uninstall Old Glide
Using your Phillips head screwdriver, remove the screws on the side of the drawer that is attached to the old glide. Carefully lift off the glide and set aside for disposal.
Step 4: Install New Glide
Position the new WP8053334 Whirlpool Drawer Glide onto the drawer, making sure it is properly aligned with the frame. Then using the Phillips head screwdriver, secure the glide with the provided screws.
Step 5: Test Glide
Test the glide by sliding the drawer back into its frame. Ensure that it moves smoothly and without sticking.
Step 6: Reconnect Power
Once your new glide is installed and functioning properly, turn the power back on and test the drawer a few more times to make sure it's working well.
Congratulations! You have successfully completed this DIY project to replace your WP8053334 Whirlpool Drawer Glide. By following these steps, you can save time and money by taking care of this project yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you having an issue with your WP8053334 Whirlpool Drawer Glide? Need to replace it but don’t know how? Don’t worry! This easy DIY guide will walk you through the process of replacing your Whirlpool Drawer Glide from start to finish.
Before You Start:
Before beginning, gather the necessary tools and materials that you will need. You will need the following:
- A Phillips head screwdriver
- An adjustable wrench
- The replacement WP8053334 Whirlpool Drawer Glide
Step 1: Disconnect Power
Turn off the power to the appliance at the main circuit breaker before starting any repairs. This will ensure your safety throughout the entire process.
Step 2: Remove Drawer
Remove any items stored in the drawer, then pull the drawer out of its frame as far as possible. Put aside in a safe place.
Step 3: Uninstall Old Glide
Using your Phillips head screwdriver, remove the screws on the side of the drawer that is attached to the old glide. Carefully lift off the glide and set aside for disposal.
Step 4: Install New Glide
Position the new WP8053334 Whirlpool Drawer Glide onto the drawer, making sure it is properly aligned with the frame. Then using the Phillips head screwdriver, secure the glide with the provided screws.
Step 5: Test Glide
Test the glide by sliding the drawer back into its frame. Ensure that it moves smoothly and without sticking.
Step 6: Reconnect Power
Once your new glide is installed and functioning properly, turn the power back on and test the drawer a few more times to make sure it's working well.
Congratulations! You have successfully completed this DIY project to replace your WP8053334 Whirlpool Drawer Glide. By following these steps, you can save time and money by taking care of this project yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
