Online Sale!
100% Guaranteed Genuine Parts
W10886919 Whirlpool Light Bulb
The Range Oven Halogen Light Bulb illuminates the inside of the appliance during operation. If your oven’s light bulb is burned out you can easily replace it with this item. This 10-watt, 12-volt bulb is an accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, minor disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this accessory.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Oven Halogen Light Bulb
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Oven Halogen Light Bulb
• Tools Needed: Multi screwdriver
Weight : 0.010800 lbs
Dimension : 1.692900 x 0.944800 x 0.944800
Compatible Brands
About this product
The Range Oven Halogen Light Bulb illuminates the inside of the appliance during operation. If your oven’s light bulb is burned out you can easily replace it with this item. This 10-watt, 12-volt bulb is an accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, minor disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this accessory.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Oven Halogen Light Bulb
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Range Oven Halogen Light Bulb
• Tools Needed: Multi screwdriver
Weight : 0.010800 lbs
Dimension : 1.692900 x 0.944800 x 0.944800
The following parts are replaced by this product
- 74004458
- W10287972
- W10827800
- WPW10287972
- 74004458
No more associated models for this part.
DIY Instructions for Replacing a Whirlpool W10886919 LMP-BASLES
Replacing the Whirlpool W10886919 LMP-BASLES is a relatively easy task and can be done without the help of an appliance technician. This guide will walk you through the necessary steps to ensure that your replacement is successful.
1. Unplug the appliance from the wall outlet and shut off any water or gas connected to it. Remove any frosted ice from the freezer and set it aside.
2. Open the access panel or rear door to your appliance and locate the old LMP-BASLES. You may need to use a flashlight to inspect it properly.
3. Once the old LMP-BASLES is located, you will need to remove any screws that are holding it in place.
4. Carefully remove the wires from the terminal leads of the old part. Depending on your model, this may be done with a flathead screwdriver or by using a pair of needle nose pliers.
5. Using a damp rag, clean the area where the new LMP-BASLES will be installed.
6. Take the new LMP-BASLES and connect the terminal leads to the wires that were removed from the old part. Make sure the connections are secure.
7. Place the new part in the opening and secure it with the screws.
8. Reassemble the access panel or rear door.
9. Plug the appliance back into the wall outlet, turn on any connected water or gas, and replace any frozen ice that was removed.
10. Test the operation of the appliance to make sure your replacement has been successful.
By following these steps, you should be able to successfully replace the Whirlpool W10886919 LMP-BASLES on your own. It is important to take your time and make sure all the connections are secure before testing the appliance. If you have any questions or concerns about the process, contact a qualified appliance technician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool W10886919 LMP-BASLES is a relatively easy task and can be done without the help of an appliance technician. This guide will walk you through the necessary steps to ensure that your replacement is successful.
1. Unplug the appliance from the wall outlet and shut off any water or gas connected to it. Remove any frosted ice from the freezer and set it aside.
2. Open the access panel or rear door to your appliance and locate the old LMP-BASLES. You may need to use a flashlight to inspect it properly.
3. Once the old LMP-BASLES is located, you will need to remove any screws that are holding it in place.
4. Carefully remove the wires from the terminal leads of the old part. Depending on your model, this may be done with a flathead screwdriver or by using a pair of needle nose pliers.
5. Using a damp rag, clean the area where the new LMP-BASLES will be installed.
6. Take the new LMP-BASLES and connect the terminal leads to the wires that were removed from the old part. Make sure the connections are secure.
7. Place the new part in the opening and secure it with the screws.
8. Reassemble the access panel or rear door.
9. Plug the appliance back into the wall outlet, turn on any connected water or gas, and replace any frozen ice that was removed.
10. Test the operation of the appliance to make sure your replacement has been successful.
By following these steps, you should be able to successfully replace the Whirlpool W10886919 LMP-BASLES on your own. It is important to take your time and make sure all the connections are secure before testing the appliance. If you have any questions or concerns about the process, contact a qualified appliance technician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review