W10190018 Whirlpool Microwave Template
The Microwave Mounting Plate is a bracket that holds the appliance in place over the range or cooktop. This is an accessory that can be used across several brands; check to see if your model number is compatible. Note that this item includes the mounting plate only and does not include the hardware needed to complete the installation. Installing the plate will require basic hand tools and novice repair experience. You must unplug the microwave or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Microwave Mounting Plate
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Microwave Mounting Plate
• Tools Needed: Multi screwdriver
The Microwave Mounting Plate is a bracket that holds the appliance in place over the range or cooktop. This is an accessory that can be used across several brands; check to see if your model number is compatible. Note that this item includes the mounting plate only and does not include the hardware needed to complete the installation. Installing the plate will require basic hand tools and novice repair experience. You must unplug the microwave or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Microwave Mounting Plate
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Microwave Mounting Plate
• Tools Needed: Multi screwdriver
Write Your Own Review
How to Replace Your Whirlpool Microwave W10190018
Tools Needed:
-Flathead screwdriver
-Phillips head screwdriver
-Pliers (optional)
-Safety goggles
Instructions:
1. Unplug your Whirlpool microwave W10190018 before beginning any repairs.
2. Remove the outer case of the microwave by unscrewing the screws on the back panel and side of the case.
3. Carefully disconnect the power cord, antennas, and other wiring connections in the microwave.
4. With a flathead screwdriver, loosen and remove the mounting screws for the microwave.
5. Carefully slide the microwave out of its slot.
6. Take the new microwave and slide it into place, making sure the slots and holes line up properly.
7. Secure the new microwave with the screws.
8. Reconnect the power cord, antennas, and other wiring connections to the new microwave.
9. Reattach the outer case of the microwave and secure with the screws.
10. Plug in your new Whirlpool microwave W10190018 and test it for proper operation.
Safety Tips:
-Never work on or attempt to repair a microwave without first unplugging it.
-Always wear safety glasses when working with small parts and tools.
-Be sure you understand exactly how to reconnect the wiring before you begin the replacement process.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
-Flathead screwdriver
-Phillips head screwdriver
-Pliers (optional)
-Safety goggles
Instructions:
1. Unplug your Whirlpool microwave W10190018 before beginning any repairs.
2. Remove the outer case of the microwave by unscrewing the screws on the back panel and side of the case.
3. Carefully disconnect the power cord, antennas, and other wiring connections in the microwave.
4. With a flathead screwdriver, loosen and remove the mounting screws for the microwave.
5. Carefully slide the microwave out of its slot.
6. Take the new microwave and slide it into place, making sure the slots and holes line up properly.
7. Secure the new microwave with the screws.
8. Reconnect the power cord, antennas, and other wiring connections to the new microwave.
9. Reattach the outer case of the microwave and secure with the screws.
10. Plug in your new Whirlpool microwave W10190018 and test it for proper operation.
Safety Tips:
-Never work on or attempt to repair a microwave without first unplugging it.
-Always wear safety glasses when working with small parts and tools.
-Be sure you understand exactly how to reconnect the wiring before you begin the replacement process.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
