100% Guaranteed Genuine Parts
INNER DOOR BEZEL WHITE
808095 Speed Queen Washer Dryer Inner Door Bezel Kit (White)
Weight : 15.434300 lbs
Dimension : 25.826700 x 24.251900 x 3.425100
About this product
808095 Speed Queen Washer Dryer Inner Door Bezel Kit (White)
Weight : 15.434300 lbs
Dimension : 25.826700 x 24.251900 x 3.425100
The following parts are replaced by this product
- 802307P
Step 1: Start by turning off the power to the washing machine. Unplug the washer from the wall outlet and shut off the water supply.
Step 2: Remove the screws or clips on the inner door bezel. Use a Phillips screwdriver to loosen the screws or clip before removing.
Step 3: Now remove the existing inner door bezel. Pull it away from the washing machine and set it aside.
Step 4: Insert the new Speed Queen 808095 KIT INNER DOOR BEZEL WHITE into the washing machine. Make sure the edges are flush against the sides of the washer to ensure a snug fit.
Step 5: Secure the inner door bezel in place with the screws or clips that were removed.
Step 6: Turn the power back on and plug in the washer. Turn on the water supply and test your new inner door bezel for proper installation.
Tips:
• Wear safety goggles and gloves when working on the washing machine to protect your eyes and hands.
• If the screws are too tight, use a rubber mallet to gently tap the screws into place. This is important so that the screws do not strip or damage the washing machine.
• Make sure the new Speed Queen 808095 KIT INNER DOOR BEZEL WHITE is locked in place before testing.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the screws or clips on the inner door bezel. Use a Phillips screwdriver to loosen the screws or clip before removing.
Step 3: Now remove the existing inner door bezel. Pull it away from the washing machine and set it aside.
Step 4: Insert the new Speed Queen 808095 KIT INNER DOOR BEZEL WHITE into the washing machine. Make sure the edges are flush against the sides of the washer to ensure a snug fit.
Step 5: Secure the inner door bezel in place with the screws or clips that were removed.
Step 6: Turn the power back on and plug in the washer. Turn on the water supply and test your new inner door bezel for proper installation.
Tips:
• Wear safety goggles and gloves when working on the washing machine to protect your eyes and hands.
• If the screws are too tight, use a rubber mallet to gently tap the screws into place. This is important so that the screws do not strip or damage the washing machine.
• Make sure the new Speed Queen 808095 KIT INNER DOOR BEZEL WHITE is locked in place before testing.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review