100% Guaranteed Genuine Parts
KIT ASSY PUMP-COMP-(VIB-WELDED
Direct drive water pump works with some Speed Queen, and Amana models of washing machines.
Weight : 2.224300 lbs
Dimension : 7.086600 x 4.881800 x 8.937000
About this product
Direct drive water pump works with some Speed Queen, and Amana models of washing machines.
Weight : 2.224300 lbs
Dimension : 7.086600 x 4.881800 x 8.937000
The following parts are replaced by this product
- 40040301
- 35742P
- 36863P
- 36863P
- 27001036
- 200937P
- 201566P
- 27001233
- 201566P
Step 1: Gather the necessary tools. You will need new Speed Queen 205217P KIT ASSY PUMP-COMP-(VIB-WELD), a flat head screwdriver, and a hex key.
Step 2: Unplug the electrical power source for the appliance.
Step 3: Locate the pump assembly in the back of the appliance.
Step 4: Remove the screws from the motor mounting plate with a flat head screwdriver.
Step 5: Disconnect the wiring harness to the motor.
Step 6: Using a hex key, remove the mounting bolts from the pump assembly.
Step 7: Lift the pump assembly off the machine and discard the old part.
Step 8: Install the new Speed Queen 205217P KIT ASSY PUMP-COMP-(VIB-WELD) by reversing the above steps.
Step 9: Test the appliance to make sure all connections are secure and functioning correctly.
Step 10: Plug the appliance back into its power source and test again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Unplug the electrical power source for the appliance.
Step 3: Locate the pump assembly in the back of the appliance.
Step 4: Remove the screws from the motor mounting plate with a flat head screwdriver.
Step 5: Disconnect the wiring harness to the motor.
Step 6: Using a hex key, remove the mounting bolts from the pump assembly.
Step 7: Lift the pump assembly off the machine and discard the old part.
Step 8: Install the new Speed Queen 205217P KIT ASSY PUMP-COMP-(VIB-WELD) by reversing the above steps.
Step 9: Test the appliance to make sure all connections are secure and functioning correctly.
Step 10: Plug the appliance back into its power source and test again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review