WP8269145 Whirlpool Dishwasher Mounting Bracket
This Dishwasher Mounting Bracket is used to mount the dishwasher to the underside of the counter where your dishwasher is installed. The old bracket is held in by metal tabs in the rail. These tabs will need to be carefully bent up with pliers in order to remove the old bracket, and then bent down again after replacing the new mounting bracket. This bracket comes with extra mounting holes that may need to be adjusted depending on where your dishwasher sits under the counter after being pushed back in. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the water supply under the sink. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) once a month or as needed, to help remove limescale and mineral buildup that can affect your dishwasher's performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Mounting Bracket
• Tools Needed: Multi screwdriver, needle-nose pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Mounting Bracket
• Tools Needed: Multi screwdriver, needle-nose pliers
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dishwasher Mounting Bracket is used to mount the dishwasher to the underside of the counter where your dishwasher is installed. The old bracket is held in by metal tabs in the rail. These tabs will need to be carefully bent up with pliers in order to remove the old bracket, and then bent down again after replacing the new mounting bracket. This bracket comes with extra mounting holes that may need to be adjusted depending on where your dishwasher sits under the counter after being pushed back in. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the water supply under the sink. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) once a month or as needed, to help remove limescale and mineral buildup that can affect your dishwasher's performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Mounting Bracket
• Tools Needed: Multi screwdriver, needle-nose pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Mounting Bracket
• Tools Needed: Multi screwdriver, needle-nose pliers
Write Your Own Review
The following parts are replaced by this product
- 8269145
DIY Guide to Replacing Whirlpool Mounting Brackets (WP8269145)
Replacing the Whirlpool Mounting Brackets (WP8269145) is a fairly easy DIY repair that can be completed in about 15 minutes. This guide will provide you with the step-by-step instructions for replacing these brackets.
Step 1: Gather Supplies
Before you start the replacement process, make sure you have the following supplies handy:
• Phillips head screwdriver
• Pliers
• Replacement Whirlpool WP8269145 mounting brackets
Step 2: Remove Old Brackets
Using your Phillips head screwdriver, loosen and remove the screws that secure the old brackets to the wall. Once the screws are removed, take the pliers and grip the bracket firmly, then pull it away from the wall. Repeat this for any additional brackets.
Step 3: Install New Brackets
Once the old brackets have been removed, you’re ready to install the new ones. If there were any plastic anchors behind the old brackets, reuse them with the new brackets. Take the first bracket and line the holes up on the wall and the bracket, then insert the screws. Tighten the screws with the Phillip head screwdriver. Make sure the screws are tight, but don’t over-tighten them.
Repeat this process with the other bracket. Double check to make sure the brackets are lined up correctly, then use your Phillips head screwdriver to tightening the screws.
Step 4: Test Out New Brackets
Once both of the new brackets are secured to the wall with the screws, test it out to make sure everything is secure. Putting pressure on the brackets to make sure they don’t move or come loose from the wall.
You’re done! Your replacement of the Whirlpool mounting brackets (WP8269145) is complete. Enjoy your newly replaced mounts!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool Mounting Brackets (WP8269145) is a fairly easy DIY repair that can be completed in about 15 minutes. This guide will provide you with the step-by-step instructions for replacing these brackets.
Step 1: Gather Supplies
Before you start the replacement process, make sure you have the following supplies handy:
• Phillips head screwdriver
• Pliers
• Replacement Whirlpool WP8269145 mounting brackets
Step 2: Remove Old Brackets
Using your Phillips head screwdriver, loosen and remove the screws that secure the old brackets to the wall. Once the screws are removed, take the pliers and grip the bracket firmly, then pull it away from the wall. Repeat this for any additional brackets.
Step 3: Install New Brackets
Once the old brackets have been removed, you’re ready to install the new ones. If there were any plastic anchors behind the old brackets, reuse them with the new brackets. Take the first bracket and line the holes up on the wall and the bracket, then insert the screws. Tighten the screws with the Phillip head screwdriver. Make sure the screws are tight, but don’t over-tighten them.
Repeat this process with the other bracket. Double check to make sure the brackets are lined up correctly, then use your Phillips head screwdriver to tightening the screws.
Step 4: Test Out New Brackets
Once both of the new brackets are secured to the wall with the screws, test it out to make sure everything is secure. Putting pressure on the brackets to make sure they don’t move or come loose from the wall.
You’re done! Your replacement of the Whirlpool mounting brackets (WP8269145) is complete. Enjoy your newly replaced mounts!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
