W10083957V Whirlpool Chopper Dishwasher

100% Guaranteed genuine parts logo
Part #: WPL W10083957V
100% Guaranteed genuine parts logo
The Dishwasher Chopper Assembly is located inside the dishwasher pump, and chops up/minces the food particles in the dishwasher to help prevent from clogging the dishwasher pump. If your drain is clogging with larger pieces of food, replacing this part may alleviate the issue. To access the part, remove the lower dishrack from the appliance and remove the lower spray arm hub. Then remove the screws holding the top of the pump on, and the cover. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the water supply under the sink. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) once a month or as needed, to help remove limescale and mineral buildup that can affect your dishwasher's performance. *affresh® brand products are owned and distributed by Whirlpool Corporation. Recommended Item: The Dishwasher Drain Pan (item 1021760) slides underneath the appliance and diverts any water leak to the front of the dishwasher.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Chopper Assembly
• Tools Needed: Multi screwdriver

Weight : 0.1395 lbs
Dimension : 4.25 x 3.19 x 1.42
$29.73
In stock
In stock
Out of stock
Enter a valid ZIP code Ok Edit
The Dishwasher Chopper Assembly is located inside the dishwasher pump, and chops up/minces the food particles in the dishwasher to help prevent from clogging the dishwasher pump. If your drain is clogging with larger pieces of food, replacing this part may alleviate the issue. To access the part, remove the lower dishrack from the appliance and remove the lower spray arm hub. Then remove the screws holding the top of the pump on, and the cover. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the water supply under the sink. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) once a month or as needed, to help remove limescale and mineral buildup that can affect your dishwasher's performance. *affresh® brand products are owned and distributed by Whirlpool Corporation. Recommended Item: The Dishwasher Drain Pan (item 1021760) slides underneath the appliance and diverts any water leak to the front of the dishwasher.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Chopper Assembly
• Tools Needed: Multi screwdriver

Weight : 0.1395 lbs
Dimension : 4.25 x 3.19 x 1.42
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. 8268383
  2. W10083957
  3. WP8268383
How to Replace the Whirlpool Dishwasher Chopper (W10083957V)

Tools You'll Need:
-Needle nose pliers
-Rag
-Phillips head screwdriver
-Replacement chopper

Instructions:
1. Unplug the dishwasher from its electrical socket.
2. Use the Phillips head screwdriver to loosen and remove the two screws securing the tub access panel to the side of the dishwasher. Carefully remove the access panel and set it aside.
3. Locate the chopper on the lower left corner toward the front of the dishwasher. Make sure that the water line is not attached or interfere with the removal process.
4. Using a rag, wipe off any debris or grime that may be on the chopper.
5. Once cleaned, use needle nose pliers to remove the three screws that secure the chopper to the dishwasher base.
6. Carefully remove the chopper and discard it.
7. Place the new chopper into position and secure it using the three screws.
8. Reattach the access panel with the two screws.
9. Plug the dishwasher back into its electrical socket.
10. Your Whirlpool dishwasher chopper has now been replaced! Enjoy your newly working dishwasher.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with admiral Compatible with amana Compatible with jenn-air Compatible with kenmore Compatible with kitchenaid Compatible with magic_chef Compatible with maytag Compatible with norge Compatible with roper Compatible with whirlpool