Online Sale!
100% Guaranteed Genuine Parts
4388286 Whirlpool Refrigerator Shelf Bar Endcap Kit 2 Pack White
The Refrigerator Door Shelf Retainer Bar End Cap connects to the retainer bar on your refrigerator’s door shelf, and attaches it to the refrigerator door. If your shelf retainer bar has become disconnected, a damaged end cap could be the cause. To remove the end cap, first unhook the release tab on both ends of the retainer bar. Slide out the bar and the end caps, and slide out the defective cap. Now, simply replace the end cap and snap the bar with end caps back in place on the refrigerator door. This part is made of white plastic and is sold as a pack of two and measures 3" H x 4" D. Installation will require basic hand tools, minor disassembly of the unit and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Weight : 0.315700 lbs
Dimension : 5.826700 x 5.314900 x 1.417300
Compatible Brands
About this product
The Refrigerator Door Shelf Retainer Bar End Cap connects to the retainer bar on your refrigerator’s door shelf, and attaches it to the refrigerator door. If your shelf retainer bar has become disconnected, a damaged end cap could be the cause. To remove the end cap, first unhook the release tab on both ends of the retainer bar. Slide out the bar and the end caps, and slide out the defective cap. Now, simply replace the end cap and snap the bar with end caps back in place on the refrigerator door. This part is made of white plastic and is sold as a pack of two and measures 3" H x 4" D. Installation will require basic hand tools, minor disassembly of the unit and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Shelf Retainer Bar End Cap
• Tools Needed: Multi screwdriver
Weight : 0.315700 lbs
Dimension : 5.826700 x 5.314900 x 1.417300
The following parts are replaced by this product
- 4387530
- 1124877
No more associated models for this part.
DIY Step-by-Step Instructions on How to Replace Whirlpool Refrigerator Shelf Bar End Cap Kit - 2 Pack - White (4388286)
1. Start by unplugging the refrigerator from the power supply. Make sure all circuits are switched off including any additional timers or switches.
2. Take out any items stored on the shelf where you will be replacing the end cap kit and take out the shelf itself.
3. Using a Philips head screwdriver, remove the screw at the top of the shelf bar which is holding the original end cap into place.
4. With the screw removed, gently pull up on the old end cap at both ends to release it from the shelf bar.
5. Take the new end cap kit and place it onto the shelf bar. Make sure that the notches at each end of the end cap kit is lined up with the corresponding holes on the shelf bar.
6. Once the notches and holes line up, push down firmly on the end cap kit so that it is securely attached to the shelf bar.
7. Secure the end cap kit in place on the shelf bar by inserting the screw you removed earlier and tightening with your Philips head screwdriver.
8. After you have secured the end cap in place on the shelf bar, replace the shelf back into the refrigerator and plug the power supply back in.
You have now successfully replaced the Whirlpool Refrigerator Shelf Bar End Cap Kit - 2 Pack - White (4388286)!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Start by unplugging the refrigerator from the power supply. Make sure all circuits are switched off including any additional timers or switches.
2. Take out any items stored on the shelf where you will be replacing the end cap kit and take out the shelf itself.
3. Using a Philips head screwdriver, remove the screw at the top of the shelf bar which is holding the original end cap into place.
4. With the screw removed, gently pull up on the old end cap at both ends to release it from the shelf bar.
5. Take the new end cap kit and place it onto the shelf bar. Make sure that the notches at each end of the end cap kit is lined up with the corresponding holes on the shelf bar.
6. Once the notches and holes line up, push down firmly on the end cap kit so that it is securely attached to the shelf bar.
7. Secure the end cap kit in place on the shelf bar by inserting the screw you removed earlier and tightening with your Philips head screwdriver.
8. After you have secured the end cap in place on the shelf bar, replace the shelf back into the refrigerator and plug the power supply back in.
You have now successfully replaced the Whirlpool Refrigerator Shelf Bar End Cap Kit - 2 Pack - White (4388286)!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review