100% Guaranteed Genuine Parts
28944RP Speed Queen Washer Upper or Lower Bearing
Upper or lower bearing works with some Speed Queen, and Amana models of washing machines.
Weight : 0.047000 lbs
Dimension : 2.598400 x 2.559000 x 0.984200
About this product
Upper or lower bearing works with some Speed Queen, and Amana models of washing machines.
Weight : 0.047000 lbs
Dimension : 2.598400 x 2.559000 x 0.984200
How to Replace the Upper or Lower Bearing on a Speed Queen 28944RP Washer
Replacing the upper or lower bearing on your Speed Queen 28944RP washer is not complicated when you have the right instructions. This guide will provide you with easy-to-follow step-by-step instructions for safely replacing the upper or lower bearing in your 28944RP washer.
1. Unplug the power cable from the power source and turn off the hot and cold water supply valves. Make sure both of these are turned off before you start.
2. Drain the remaining water inside the washer by removing the hose connected to the drain pump.
3. Disconnect the washer’s top panel by removing the screws located at the back of the machine.
4. Unscrew the cover on the back of the machine and remove it to expose the bearing.
5. Use a screwdriver to remove the bearing retainer, then carefully remove and discard the old bearing.
6. Once the old bearing is removed, replace it with the new one by reversing the steps used to remove the old one.
7. Reinstall the bearing retainer and the back panel on the machine.
8. Reconnect the hose and reconnect the power source.
9. Turn on the hot and cold water supply valves and your washer is ready for use.
By following these steps, you can safely and easily replace the upper or lower bearing on your Speed Queen 28944RP washer. If you encounter any problems, be sure to refer to the owner’s manual for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the upper or lower bearing on your Speed Queen 28944RP washer is not complicated when you have the right instructions. This guide will provide you with easy-to-follow step-by-step instructions for safely replacing the upper or lower bearing in your 28944RP washer.
1. Unplug the power cable from the power source and turn off the hot and cold water supply valves. Make sure both of these are turned off before you start.
2. Drain the remaining water inside the washer by removing the hose connected to the drain pump.
3. Disconnect the washer’s top panel by removing the screws located at the back of the machine.
4. Unscrew the cover on the back of the machine and remove it to expose the bearing.
5. Use a screwdriver to remove the bearing retainer, then carefully remove and discard the old bearing.
6. Once the old bearing is removed, replace it with the new one by reversing the steps used to remove the old one.
7. Reinstall the bearing retainer and the back panel on the machine.
8. Reconnect the hose and reconnect the power source.
9. Turn on the hot and cold water supply valves and your washer is ready for use.
By following these steps, you can safely and easily replace the upper or lower bearing on your Speed Queen 28944RP washer. If you encounter any problems, be sure to refer to the owner’s manual for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review