WB2X9719 GE Oven Support Bracket Clip
GE General Electric Hotpoint Sears Kenmore Range Stove Oven Broil Element Support Bracket Clip WB2X9719
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE General Electric Hotpoint Sears Kenmore Range Stove Oven Broil Element Support Bracket Clip WB2X9719
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- WB2X9438
- 334565
- 339593
- WB02X9576
- 339593
- 4337249
- 4338587
- WB02X9438
- 334565
- WB02X9719
DIY Instructions on How to Replace a WB2X9719 GE Support Bracket Clip
Replacing a WB2X9719 GE Support Bracket Clip is a relatively simple task but it does require some preparation and the proper tools for the job. This guide explains how to safely and effectively remove and replace the WB2X9719 GE Support Bracket Clip.
Tools Needed to Replace the Clip:
• Phillips head screwdriver
• Flathead screwdriver
• Needle-nose pliers
Instructions:
1. Use a Phillips head screwdriver to remove the screws securing the bracket clip to the appliance.
2. Unscrew the screws holding the bracket clip in place.
3. Insert a flathead screwdriver into the gap between the two metal pieces.
4. Carefully pry the metal pieces apart to separate them from the clip.
5. Place a needle-nose pliers around the plastic portion of the clip to remove it from the metal bracket.
6. Position the new WB2X9719 GE Support Bracket Clip in the same orientation as the old one.
7. Secure the bracket clip to the appliance with the screws.
8. Reassemble the metal pieces around the new clip.
9. Tighten the screws to secure the clip in place.
Now your WB2X9719 GE Support Bracket Clip has been successfully replaced!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a WB2X9719 GE Support Bracket Clip is a relatively simple task but it does require some preparation and the proper tools for the job. This guide explains how to safely and effectively remove and replace the WB2X9719 GE Support Bracket Clip.
Tools Needed to Replace the Clip:
• Phillips head screwdriver
• Flathead screwdriver
• Needle-nose pliers
Instructions:
1. Use a Phillips head screwdriver to remove the screws securing the bracket clip to the appliance.
2. Unscrew the screws holding the bracket clip in place.
3. Insert a flathead screwdriver into the gap between the two metal pieces.
4. Carefully pry the metal pieces apart to separate them from the clip.
5. Place a needle-nose pliers around the plastic portion of the clip to remove it from the metal bracket.
6. Position the new WB2X9719 GE Support Bracket Clip in the same orientation as the old one.
7. Secure the bracket clip to the appliance with the screws.
8. Reassemble the metal pieces around the new clip.
9. Tighten the screws to secure the clip in place.
Now your WB2X9719 GE Support Bracket Clip has been successfully replaced!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
