WP3387747 Whirlpool Dryer Heating Element
This Dryer Heating Element is a replacement part that generates heat for drying your clothes. Be sure to check the thermal fuse on dryer before replacing the heating element. This is a 240 volt, 5400 watt heating element, and has 5/16" terminals. If your dryer isn't heating as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver
Weight : 1.863300 lbs
Dimension : 15.393700 x 6.574800 x 2.559000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dryer Heating Element is a replacement part that generates heat for drying your clothes. Be sure to check the thermal fuse on dryer before replacing the heating element. This is a 240 volt, 5400 watt heating element, and has 5/16" terminals. If your dryer isn't heating as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver
Weight : 1.863300 lbs
Dimension : 15.393700 x 6.574800 x 2.559000
Write Your Own Review
The following parts are replaced by this product
- 3387747
- WP3387747VP
- DE7747
DIY: How to Replace a Whirlpool Dryer Heating Element
Tools and Parts Needed:
• Phillips screwdriver
• New heating element
• Small flat head screwdriver
Instructions:
1. Unplug the power cord from the power outlet.
2. Remove the screws from the back or bottom of the dryer, depending on the model you have. This will give you access to the interior of the dryer.
3. Disconnect the connecting wires to the old heating element, then remove it.
4. Install the new heating element by connecting the wires that were previously attached to the old element.
5. Secure the heating element in place by re-attaching the screws removed earlier.
6. Restore power to the dryer by plugging the power cord back into the power outlet.
7. Test the new heating element by running the dryer; if it is working correctly, it should heat up quickly.
Congratulations! You have successfully replaced the Whirlpool Dryer Heating Element.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools and Parts Needed:
• Phillips screwdriver
• New heating element
• Small flat head screwdriver
Instructions:
1. Unplug the power cord from the power outlet.
2. Remove the screws from the back or bottom of the dryer, depending on the model you have. This will give you access to the interior of the dryer.
3. Disconnect the connecting wires to the old heating element, then remove it.
4. Install the new heating element by connecting the wires that were previously attached to the old element.
5. Secure the heating element in place by re-attaching the screws removed earlier.
6. Restore power to the dryer by plugging the power cord back into the power outlet.
7. Test the new heating element by running the dryer; if it is working correctly, it should heat up quickly.
Congratulations! You have successfully replaced the Whirlpool Dryer Heating Element.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible brands information is not available for this part.